Solihull80
New Member
- Posts
- 5
- Location
- SE9
Hi, I'm trying to fit some spot lights and could do with some wiring help - it's not working and I've no idea why.
I've fitted 2 spots on a bar on the roof driven by a relay which should be switched by main beam and an override.
If I don't use the main beam and just take power off the battery straight onto the override then it works fine, but trying to take power from the main beam, nothing - as if there's no juice in that wire.
I've used the blue wire with white stripe taken from in the engine bay near the bulkhead on the LH side. Everything is earthed straight onto battery negative.
Am I doing anything obviously wrong?
Vehicle is a 110 Td5.
I've fitted 2 spots on a bar on the roof driven by a relay which should be switched by main beam and an override.
If I don't use the main beam and just take power off the battery straight onto the override then it works fine, but trying to take power from the main beam, nothing - as if there's no juice in that wire.
I've used the blue wire with white stripe taken from in the engine bay near the bulkhead on the LH side. Everything is earthed straight onto battery negative.
Am I doing anything obviously wrong?
Vehicle is a 110 Td5.
