Speedo problem

A

ARTMUSS

New Member

Posts

3

• Apr 30, 2010

• #1

My faithful 1984 ex-military LWB landy has just suddenly developed a problem with the speedo. It has just stopped working. I've replaced the cable ( both ends correctly inserted ) and it still won't work.The speedometer needle spins when I insert the end and turn it,but when I put it back on and refit the fascia it just won't work! Any HELP would really be appreciated as I have tried everything.If I have to replace the speedo, any ideas where I could get one ( reasonably cheaply ).
Thanks in advance
ARTMUSS

 

GingerPuss

Active Member

Posts

232

Location

Southport

• Apr 30, 2010

• #2

I had the same issue a year or two ago....the cable turned, but nothing on the speedo.

Turns out I hadn't managed to get the cable end to seat in the speedo properly...it will push in and seem to have been seated...but should go in until it clicks. You may have to let the cable end turn a fraction before you push it in the correct angle - like a key in a lock.

 

A

ARTMUSS

New Member

Posts

3

• May 1, 2010

• #3

Hi GingerPuss,
Thanks for the ultra quick reply,I'll try that.When I inserted the cable end it did NOT click. So, I'll give it a go and post a reply as to how I got on.
Thanks again,
ARTMUSS

 

Last edited: May 1, 2010

C

cao

New Member

Posts

80

• May 2, 2010

• #4

I had the same problem a while back. I ended up by connecting the speedo end first whilst slowly turning the gearbox end with a battery drill, once the speedo was registering I connected up the gearbox. I half expected it to dislodge again but have had no more problems.

 

S

sirleefellow

New Member

Posts

17

Location

stockport

• May 6, 2010

• #5

What is involved in changing the speedo cable,because mine is knackered aswell

 

A

ashleywood.ash

Active Member

Posts

558

Location

sheffield uk

• May 6, 2010

• #6

didnt think a series needed a speedo, you could just work out your speed as you watch pedestrians walk past

 

oxides

Well-Known Member

Posts

5,078

Location

Worcs

• May 6, 2010

• #7

It's worth checking the speedo end of the cable is rotating with the gearbox. My dodgy speedo problems only went away when I changed my gearbox for a recon one, my old box had a knackered speedo drive. You do have to make sure the speedo end is lined up with the speedo head and the cable outer clicks into place - I jacked up a rear wheel and got my son to rotate it as I fitted the head end. And yes, you need the hands of a gynecologist (or vet) to do it!