Sourcing LR 90 non pas four bolt steering box internal gears

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Grem

Active Member
Posts
248
Location
Wiltshire
As title says, I have got my steering box removed and apart as bottom dust seal was in pieces, (had done its job, box was full of oil and not leaking), and the worm shaft has worn through the case hardening in the straight ahead position, and the 'wheel' that it turns against is pretty worn all around as well, tried to look for new gears, I understand the PAS boxes are a lot more common, have looked on the usual lr suppliers, ebay, and just searching for steering box parts. From research I believe it is a Gemmer steering box, I can easily post some pictures if anyone requires more identifying.

I was just wondering if anybody knows where I can find such gears or has any NOS gears or some good condition used gears maybe

Thanks in advance to all replies

IMG_1832.JPG


Drop arm was quite stuck, had 5ft of pipe on the puller handle and a breaker bar through the puller legs to stop the lot going round
 
Knew I missed something, I have a D1 300tdi pas box in unkown condition, I wondered if the internals would fit in my box, before I pull it apart and find out the hard way
 
They look perfect, I'll give them a bell, if they wont sell me the internals its not a bad price for the whole box.

Thank you very much Huddy
 
Can you let us know how you get on? I've got one that I'd like to fettle up, and have got round to tracking suppliers of seals etc.. yet.
 
Knew I missed something, I have a D1 300tdi pas box in unkown condition, I wondered if the internals would fit in my box, before I pull it apart and find out the hard way
no they wont the only parts that will fit are from another gemmer manual box
you could google rtc5911(aeu4021) and rtc5908
 
Back
Top