Someone's Nicked Me Adjuster

KeepDigging

New Member

Posts

403

Location

East Midlands

• Feb 18, 2014

• #1

I'm happy that the new handbrake shoes have bedded in now so I tried adjusting the cable right. Pulled the switch panel off, took a look under the handbrake lever and saw:

• cable disappearing into a metal tube (with threads and groove on the outside)
• bracket for securing handbrake lever assembly
• transmission tunnel

Didn't see:

• adjuster nut
• clip for retaining adjuster nut

The parts sites keep showing me pictures of the drum end of things whenever I look for an adjuster so does anyone know the part numbers ? I really would like more than one spare click on the lever

 

Mr Noisy

Coming in your ears.

Posts

10,146

Location

Altrincham, Cheshire

• Feb 18, 2014

• #2

Pretty damn certain all handbrakes are adjusted at the drum

My 200 was for sure!

 

lyron

Active Member

Posts

536

Location

ibstock liecestershire

• Feb 18, 2014

• #3

so is our 300tdi.:high5:


ron.

 

KeepDigging

New Member

Posts

403

Location

East Midlands

• Feb 18, 2014

• #4

Yes, there's a 17mm bolt on the drum backplate (which I'm now very familiar with) that adjusts the bottom end of the shoes.

The cable (which operates the top end of the shoes) should be adjusted under the lever according to Haynes. I've seen pictures of a large turny wheel thing under the lever and seen diagrams in the workshop PDF that show "Adjuster" and "Retaining Clip" (though annoyingly without part numbers )

Anyone ?

 

RichP

Active Member

Donater

Posts

356

Location

Aberystwyth Mid Wales

• Feb 18, 2014

• #5

Have a look in the parts catalogue to see if you can find the part no.
Land Rover Discovery Spare Parts & Accessories | LR Parts
Or:
http://lrparts.ru/engl/

 

Last edited: Feb 18, 2014

Mr Noisy

Coming in your ears.

Posts

10,146

Location

Altrincham, Cheshire

• Feb 18, 2014

• #6

Hmmm.

My 200 never had adjustment at the lever but ah yes it has just come to me it was adjusted at the drum end using a threaded portion on the cable.

Being fixed cable at the drum the 300 must be at the lever end!

Check underneath just to be sure??

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Feb 18, 2014

• #7

you adjust shoes then cable , 200 does have adjustment on cable at the bracket in front of hand brake assembly ,300 has a black turn buckle where cable comes through tunnel can be adjusted by removing switch panel

 

Last edited: Feb 18, 2014

KeepDigging

New Member

Posts

403

Location

East Midlands

• Feb 19, 2014

• #8

Thank folks

Turny bit = NTC5009
Spring clip = NTC5147

I might have a decent handbrake shortly.