solid sides

bluehaze · Jul 11, 2011

Ok, when the landy is back I intend to change the sides for solids ones. Can anyone confirm that the 88" sides are a direct swap for my 110 county ones? Do the rear seatbelts attach in the same manner as they currently do?

Then I just need to find some..........

op2:

lanny man 90 · Jul 11, 2011

yes just a straight swap good luck with finding some tho

bobbler · Jul 11, 2011

not a completely straight swap, they do need a little tweaking.

changed my county sides for 88" van sides and needed to make a couple of small modifications. The old 88" draught proofing is riveted in and leaves a small metal lip which needs to be removed before the existing csw draught proofing strips fit and the inner window surrounds will require cutting/notching if you want to refit them too.

bobbler · Jul 11, 2011

Seatbelts fit in the same place but again had to drill a small hole into the housing so that they fit flush to the sides.

Boris113 · Jul 12, 2011

lanny man 90 said:
yes just a straight swap good luck with finding some tho

I found a set in a skip at uni last year when they were clearing out the old machinery wing...result!

...now I just need a 110 or swb series to attach them to!:doh:

Mike_B · Jul 12, 2011

I have a set availale......

solid sides

bluehaze

Well-Known Member

lanny man 90

Well-Known Member

bobbler

New Member

bobbler

New Member

Boris113

Well-Known Member

Mike_B

Active Member

Similar threads