Soft Top Fitting Question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

ANK84

Member
Posts
43
Hi all

Just fitted a set of Exmoor trim hood sticks. Was previously a hard top which I removed. There was no seal on the top of the windscreen itself and as such the sharks tooth header rail has bolted directly to the top of the windscreen - this doesn’t seem right to me and seems an obvious point for water ingress. The fitting video has one as seen in the screen capture attached:

1721832763044.png



any ideas of a part number or where to find one? Google either produces 90 seals or the thick ones for hard top which is the front seal and guess it should be a thin rubber seal as per this video. I can’t see anything on the parts catalogue or optional equipment catalogue either!

Help as ever appreciated!

Many thanks
 
Anaconda said:
Can you not buy a roll of foam from Ebay the correct thickness?
Or try YRM for advice and a seal.
Click to expand...
Thanks anaconda. Useful pointers. Would a foam seal be waterproof though? I was thinking of getting some to stop my seat box cover from rattling in any event 😂
 
The instructions with my Exmoor trim hood set said to bolt the top rail to the top of the windscreen, then clamp the front of the rail with the hood hooks on to the front of the windscreen top rail and rivet it in place, the rail should already be drilled, you just need to drill through the holes into the windscreen top rail. I did this to mine with no rubber seal between the windscreen and hood rail and there have been no leaks even in the heaviest rain. If you don't rivet the hood rail down, the tension in the hood can pull it away from the windscreen causing leaks and a baggy hood at the front. I don't know if this only applies to the Exmoor Trim hood sticks or to other makes as well.
 
Last edited:
Dorset_dumpling said:
The instructions with my Exmoor trim hood set said to bolt the top rail to the top of the windscreen, then clamp the front of the rail with the hood hooks on to the front of the windscreen top rail and rivet it place, the rail should already be drilled, you just need to drill through the holes into the windscreen top rail. I did this to mine with no rubber seal between the windscreen and hood rail and there have been no leaks even in the heaviest rain. If you don't rivet the hood rail down, the tension in the hood can pull it away from the windscreen causing leaks and a baggy hood at the front. I don't know if this only applies to the Exmoor Trim hood sticks or to other makes as well.
Click to expand...
That’sa good point- I ignored the riveting point as wasnt part of their fitting instructions video. I did speak with them earlier today though and it seems to be an optional element- original was riveted but you see so many that aren’t. I think a strip of neoprene tape for extra peace of mind
 
Whilst I’m here…anyone fitted canvas door cards? I’m thinking self tapping screws and small pilot holes through both canvas and door frame?
 
ANK84 said:
That’sa good point- I ignored the riveting point as wasnt part of their fitting instructions video. I did speak with them earlier today though and it seems to be an optional element- original was riveted but you see so many that aren’t. I think a strip of neoprene tape for extra peace of mind
Click to expand...
They did suggest a bead of bathroom silicone if necessary 👀
 
ANK84 said:
That’sa good point- I ignored the riveting point as wasnt part of their fitting instructions video. I did speak with them earlier today though and it seems to be an optional element- original was riveted but you see so many that aren’t. I think a strip of neoprene tape for extra peace of mind
Click to expand...
They did suggest silicone if necessary
Anaconda said:
Something like the link.
Silicone sealer not to be used on cars, it's for bathrooms .
Click to expand...
👍😂
 
I've got a bikini hood fitted, sharks tooth directly onto the windscreen and no leaks.

Also have canvas door cards, self tappers and counter sunk washers to hold them in place.
 
WoodyO said:
I've got a bikini hood fitted, sharks tooth directly onto the windscreen and no leaks.

Also have canvas door cards, self tappers and counter sunk washers to hold them in place.
Click to expand...
Thanks woody. Self tappers and cup washers on order. I think I'll get the riveter going this weekend as well
 
You must log in or register to reply here.

Similar threads

A
Canvas Cover Question
Replies
8
Views
603
ANK84
A
P
D90 Hard to soft top conversion questions
Replies
10
Views
852
Peio
P
C
Canvas Roof Height?
Replies
5
Views
2K
Dorset_dumpling
Dorset_dumpling
S
Refitting of Steering Relay top seal
Replies
6
Views
1K
LordOWar
LordOWar
dag019
Difference between hard top and station wagon roof
Replies
9
Views
376
julianf
julianf
Back
Top