domderbyshire
Active Member
- Posts
- 198
- Location
- Bracknell
My belt has just snapped. What belt do I need, please? Bit of an emergency!
Snapped fanbelt
- Thread starter domderbyshire
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
A lot depends on what engine you have, but I would fit a new one.
domderbyshire
Active Member
- Posts
- 198
- Location
- Bracknell
Yes, sorry. Done in a hurry. It's a 1993 200 Tdi.
Huntinghicap
Well-Known Member
- Posts
- 150
- Location
- South East
V Belt. Do you need help? if so LZIR is where you want to be.
domderbyshire
Active Member
- Posts
- 198
- Location
- Bracknell
I’ve managed to work round it for this evening, the RAC are coming tomorrow to fit a belt, but I need to supply it. Apparently, Euro Carparts can get one, but I’m not sure what to order! The belt measured 1025 mm and it looks like a V belt is needed.
Huntinghicap
Well-Known Member
- Posts
- 150
- Location
- South East
Huntinghicap
Well-Known Member
- Posts
- 150
- Location
- South East
Part number should work with autoparts as well I would think.
- Posts
- 6,592
- Location
- uk
Arn't you supposed to use your wifes / girlfriends nylon stocking for an emergency fan belt?
domderbyshire
Active Member
- Posts
- 198
- Location
- Bracknell
Thank you. I phoned the RAC to say I had sourced the part from Euro Carparts and that they could collect it on their way to me, as advised by the guy who attended today. However, I was told the RAC must source their own parts and that the mechanic would not be allowed to collect the part! What’s the betting they turn up with the wrong part or no part tomorrow?
As for stockings, my wife isn’t that exotic and I don’t have a girlfriend...
As for stockings, my wife isn’t that exotic and I don’t have a girlfriend...
domderbyshire
Active Member
- Posts
- 198
- Location
- Bracknell
All done. The RAC man was a star and I’m up and running again. Thanks for all your advice.
NiallRussell
Well-Known Member
- Posts
- 619
- Location
- Dorset, UK
Get yourself a viscous fan spanner, a bar with a 15mm (?) socket, a strap wrench, a 13mm spanner, and a spare water pump and aux belt.
I've used those things more time that I would like to get back going. Saves a lot of pain having them ready to go. You WILL use them.
I've used those things more time that I would like to get back going. Saves a lot of pain having them ready to go. You WILL use them.
