Sill Guards

A

Andy J

Active Member

Posts

128

Location

Cornwall

• Nov 10, 2020

• #1

Hi the time has come to fabricate sill, rock, tree guards I was going to use 75x50x4mm box with some sort of tubing to finish these are not for steeps but to protect the bottom of the doors and lower body work any suggestions or pictures would be very helpful Cheers.

 

v8250

Well-Known Member

Posts

6,872

Location

Deepest Darkest...

• Nov 10, 2020

• #2

whu not try here https://dixonfabrication.co.uk/index.php?route=product/category&path=89_106 they're superbly priced compared to many other suppliers and can't imagine they can be made at a lower cost to same quality - have a set on my 90, they're very good https://dixonfabrication.co.uk/DEFENDER-90-ROCK-SLIDERS-

 

ronsealdeath

Sagging Member

Posts

1,851

Location

Swansea, Wales

• Nov 10, 2020

• #3

+1 they are good

 

A

Andy J

Active Member

Posts

128

Location

Cornwall

• Nov 10, 2020

• #4

Hi the problem is I have a Designa chassis with the bulkhead out riggers in front of the bulkhead feet so I don't think of the shelf ones would fit.

 

v8250

Well-Known Member

Posts

6,872

Location

Deepest Darkest...

• Nov 10, 2020

• #5

Andy J said:

Hi the problem is I have a Designa chassis with the bulkhead out riggers in front of the bulkhead feet so I don't think of the shelf ones would fit.

Click to expand...

Pah, wouldn't left that put me off - give Dixon Fab a call, you take the measurement, they make the modifications; afterall, they are Land Rover protection fabricators