Sill Channel to Tub - how to fix?

K

Karls

Active Member

Posts

508

Location

Gloucestershire

• Jul 16, 2016

• #1

I've tried to attach a picture, hope it's worked. I tried to fit a rh sill channel (MWC1086) today, no problem with fixings to bulkhead but I'm unsure about fixings to the tub. Looking at my exploded view drawings, it says to use M6 bolts and a nut grip which, I assume fit in the slots in the end bracket that is attached to the sill channel. But how does this fit to the tub with those two big holes you can see? I'm clearly missing something but it's been ages since I took it all apart so any help is welcome. Thanks.


[GALLERY=][/GALLERY]

 

Attachments

• 
  20160716_115539.jpg

  711 KB · Views: 268

simonlap

Member

Posts

71

Location

West Midlands

• Jul 16, 2016

• #2

is there no access to underneath the sill so the bolts can be done up into the blind nut grips which will be in the new channel?

 

Al2O3

Well-Known Member

Full Member

Posts

11,023

Location

North of the Wall

• Jul 16, 2016

• #3

The end of your sill rail should have an upstand, like the one in this link to YRM The holes in the upstand should match the holes in your tub. The height/position of the upstand is adjustable. By the look of it your holes have corroded out a bit and so larger (Like penny) washers might be needed. Look through the thimbnail pictures on the YRM site to see different views of the sill rail and upstand bracket.

 

K

Karls

Active Member

Posts

508

Location

Gloucestershire

• Jul 16, 2016

• #4

Thanks.
Am I right in thinking the bottom corner of the seatbox and a bracket are fixed also through these two holes?

 

Al2O3

Well-Known Member

Full Member

Posts

11,023

Location

North of the Wall

• Jul 16, 2016

• #5

Yes, the seat box bolts through the same two holes. What bracket are you thinking of?

 

K

Karls

Active Member

Posts

508

Location

Gloucestershire

• Jul 16, 2016

• #6

I don't know the part no. but it's a small corner bracket, plated on one face...seatbelt anchor maybe?

 

K

Karls

Active Member

Posts

508

Location

Gloucestershire

• Jul 16, 2016

• #7

#345100/1 Gusset sill RH/LH!

 

Al2O3

Well-Known Member

Full Member

Posts

11,023

Location

North of the Wall

• Jul 16, 2016

• #8

Is this a 90 you are working on?

 

K

Karls

Active Member

Posts

508

Location

Gloucestershire

• Jul 17, 2016

• #9

Yes, 1985 90 Truck Cab, sorry, should have mentioned that!!

 

Flossie

Well-Known Member

Posts

11,001

Location

Shropshire

• Jul 17, 2016

• #10

Yes, bottom seatbelt mounting.

 

Al2O3

Well-Known Member

Full Member

Posts

11,023

Location

North of the Wall

• Jul 17, 2016

• #11

 

K

Karls

Active Member

Posts

508

Location

Gloucestershire

• Jul 17, 2016

• #12

Thank you for the above. I identified it from the same source as that. Don't know what I'd do without those exploded views!