silicone flexi hose

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I dont think there is anything to pierce it, is there a better solution you could suggest? i need it before next weekend.

Im going to miss out off roading tomorrow :mad: well at least I found it before I went in the water
 
Im looking to get some flexi pipe
I may get this
Flexi Induction Cold Air Intake Duct Pipe With Clamps | eBay

there is a firm what fits pumps to HGVs what i mean to call in on
They should have verious size induction pipe they use for ther pumps

I have given this stuff ago but im not completely happy with it, it is too difficult to seal the ends because of the wire spiral inside it.

I used 2 hose clamps each end with silicone sealant and one end slightly leaks with my hand over the top of the snorkel.

It will do for now i guess, will just keep out of the really deep stuff
 
I used some foam sticky strip to give the wire somthing to squash into. You could run a silicone beed round the tube. When itdrys itl make a good seal
 
Have you received this yet? I'm interested to know if it actually looks like the picture? I ordered twice from them and it was different (and of much lower quality) both times :(

I can only compare it to the ducting that came with my old Southdown snorkel. This feels much more substantial.





 
Have you received this yet? I'm interested to know if it actually looks like the picture? I ordered twice from them and it was different (and of much lower quality) both times :(


I have just been to a pipe shop :D
all they have is 63mm, my fixings are 65mm, the silicon hoses are ok (they stretch, nice fit) but the pipe with steel wire in wouldnt go over , I could have probably made it fit but may have made it week


so plan B
Ive ordered that pipe in the link I put on (the one mark D got) It will do for now ,76mm so i'll have to use reducer and stuff
 
Back
Top