Side panels 110 onto 90?
- Thread starter Merryck
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
simonm15
Member
- Posts
- 89
- Location
- West Berkshire
Could try fitting these instead of changing panels?
Blind Spot Window for Land Rover Defender 90 & 110
Blind Spot Window for Land Rover Defender 90 & 110
top drive
Well-Known Member
- Posts
- 2,694
- Location
- Peoples republic of culter
why not fit windows to your existing panels ?
- Posts
- 10,368
- Location
- A bit sarf of Dorking
Yes, they're the same, 90/110.
WRONG. I'VE BEEN CORRECTED.
WRONG. I'VE BEEN CORRECTED.
Last edited:
top drive
Well-Known Member
- Posts
- 2,694
- Location
- Peoples republic of culter
.
besides being longer ? depends if its a 5 door or 3 door 110.... iirc the 5 door rear sides will fit - the 3 door wont
Last edited:
- Posts
- 4,617
- Location
- Nuneaton & Snowdonia
No they're not the same at all.
The 110 CSW four door rear panels are the same as an 88" series.
The 110 CSW four door rear panels are the same as an 88" series.
Discokids
Well-Known Member
- Posts
- 3,160
- Location
- Derbyshire
110sw side panels are about 2" too short. Only panels off another 90 will fit.
- Posts
- 10,368
- Location
- A bit sarf of Dorking
I'm so sorry to have given duff advice. In my defence, I sold my 110 sides to a local 90 owner who was going to use them on his car. He told me that they would fit, and has never confessed that they didn't. I'm going to have some fun with that. The only other side panels I've spannered were from my 88", which had, at one time been stored with the 110 ones, and were obviously the same size.
I've relearned a lesson. Never assume.
I've relearned a lesson. Never assume.
