jimbot90
New Member
- Posts
- 4,410
- Location
- notts/derbys area
it would av to be a very stiff one.
short arse in a defender!
- Thread starter rafa_surf
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lil-landy
New Member
- Posts
- 473
- Location
- Near Sheffield
Ahh, I've got a little niece and shes still not used to the toilet yet..
rafa_surf
New Member
- Posts
- 1,299
rite i'm this close to orderin a fold down step for the mrs....
had a wee gander under me landy (defender 90), passengers side door.
wandering if anyone can tell by these photos if all seems normal 'fittings' wise for a regular side step...
just not sure wat exactly should or shoudnt be there thats all!:doh:
attached are 2 pics for each 'bracket', at different angles
had a wee gander under me landy (defender 90), passengers side door.
wandering if anyone can tell by these photos if all seems normal 'fittings' wise for a regular side step...
just not sure wat exactly should or shoudnt be there thats all!:doh:
attached are 2 pics for each 'bracket', at different angles
Attachments
TheVengefulElephant
Well-Known Member
- Posts
- 6,527
I can't see the bonnet or the wingtops in mine :shrug:
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
rafa_surf
New Member
- Posts
- 1,299
Fook me rafa that's a bit serious int it???
ah yeah, ya may be rite there, i'l tone it down to...fookin bitch, hows that!!
shes costin me a new seat and a bloody step pikey!wunt you be mad!
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
ah yeah, ya may be rite there, i'l tone it down to...fookin bitch, hows that!!
shes costin me a new seat and a bloody step pikey!wunt you be mad!
hahaha read me post again ya twot..
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
yeah thats the bracket you hang um on and 1 bolt should go through the chassis too
Last edited:
woods767
Well-Known Member
- Posts
- 1,262
On the sill bracket? Probaly right but looks flimsey. My 110s steps are attched strait to the outriggers like rock sliders.
Medusa
Well-Known Member
- Posts
- 2,356
- Location
- Lough Corrib, Co. Mayo, Eire
I'll check out mine tomorrow and let you know how mine fit on.
I'm settled now with a nice glass of wine and its too cold to go out now.
I'm settled now with a nice glass of wine and its too cold to go out now.
Medusa
Well-Known Member
- Posts
- 2,356
- Location
- Lough Corrib, Co. Mayo, Eire
Right heres some pics. Those brackets are definately not for the steps, the aluminium sill is bolted in place by those brackets.
It actually looks like the frame of the step slots into the U section of the sill support and is bolted straight through. It is very substantial and has an addition tie rod which bolts directly onto the chassis.
You can see the sill bracket in the photo above
Showing the tie rod attached to the chassis
Hopes this helps.
It actually looks like the frame of the step slots into the U section of the sill support and is bolted straight through. It is very substantial and has an addition tie rod which bolts directly onto the chassis.
You can see the sill bracket in the photo above
Showing the tie rod attached to the chassis
Hopes this helps.
Medusa
Well-Known Member
- Posts
- 2,356
- Location
- Lough Corrib, Co. Mayo, Eire
Happy to help and thanks for the sig. 
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..