Series wings inner & outer

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomhop

tomhop

Active Member
Posts
320
Location
Scotland Angus
been trawling the inter webs looking for series 3 inner wing panels for the front wings but no one seems to do them. Has anyone come across them or have a good source for the other front wing components?
 
tomhop said:
been trawling the inter webs looking for series 3 inner wing panels for the front wings but no one seems to do them. Has anyone come across them or have a good source for the other front wing components?
Click to expand...
I am in the same boat, as I currently do not have any inner wings fitted and it will rot away my heater and fan if I do not get something in their soon. I am considering making my own out of some old conveyor belt or truck mud guards until I can fin the proper parts.
 
These are plain metal. I think you can get galv ones, but dunno where from. I painted mine with Chassis Black.
 
The key is to put extra nuts on the bolts so they sit 1/4" off the footwell, that way the water and mud drains out the bottom and you preven the rust trap on the footwell.
 
I wasn’t meaning the mud shield I was meaning the engine bay side of the front wing,

all I can find is the front panel where the lights are fitted and the outer side skin in plastic or aluminium.

One of my inner wings was a bit chewed up when I took it off, might end up having to make one if no one knows of anyone who makes them?

I don’t need them but I never saw the top side of the wings anywhere either.

Also are the plastic outer skins any good or do they never look right?
 
They come up on e-bay quite often. Once they are off you should be able to beat worst of the dents out. I patch the bodywork using countersunk pop rivets. Its acceptable for aircraft so why not a Series?
 
Rattlegun said:
The inner wings are a very simple shape, easily copied with some plain ally sheet and some wood and clamps to put the bends in.
Click to expand...
My trouble is it is all crumpled and smashed not sure how it happened, my main worry is getting the fixing points in the right place. Has anyone got any dimensions or even better some diagrams?
 
tomhop said:
??
Click to expand...
If you've been a good chap and have contributed enough to the forum you can post an advert here =>

https://www.landyzone.co.uk/forum/land-rover-accessories-parts.62/

You could do a "want to buy" inner series wings advert - it might help. It might get ignored - but hey you never know

Failing that is there not a series 3 club somewhere you could join / see if they too have a spare parts for sale section?

(I know the series 2 club has one but I'm not sure if inner wings will fit between a 2 and a 3 mainly because of the lack of space / need for a brake booster - I think there's four / six cylinder differences too)
 
You must log in or register to reply here.

Similar threads

S
Trouble fitting front wing
Replies
3
Views
560
steve2286w
steve2286w
I
Series 2 Retirement
Replies
11
Views
1K
Ian ath
I
A
Different rear wing length
Replies
2
Views
1K
Bobsticle
Bobsticle
Kingshill-Rover
Series 3 LWB in Buckinghamshire - Front Springs
Replies
11
Views
934
Rangieman123
Rangieman123
Britcyclerider
90 aftermarket outer wing panel quality
Replies
9
Views
949
300bhp/ton
300bhp/ton
Back
Top