cherokeegraham
New Member
- Posts
- 7
- Location
- Poole, Dorset
Hi guys, just about to start restoring a 2a, whats the best method of getting the body down to bare metal?
series paint removal
- Thread starter cherokeegraham
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nitromors or any good brand of paint stripper, use in a well ventilated area and no smoking near the stuff as it nullifies it. Using paint stripper can be very time consuming (takes me 40 hours to strip one of my classics back to bear metal), so recently I have taken to using a blow toch, let the paint bubble with heat and scrape off removing the heat scource so no fire ensues. This method is also very good for the longetivity of the alloy panels as it anneals it so removes all the stresses that have built up over the years. Hope this helps, Barry
cherokeegraham
New Member
- Posts
- 7
- Location
- Poole, Dorset
Cheers Barry, blow torch it is then.
craig staff
New Member
- Posts
- 64
- Location
- luton
sandpaper and elbow grease
cherokeegraham
New Member
- Posts
- 7
- Location
- Poole, Dorset
I'm running out of elbow grease. Spiderman, round about how much would it cost to have the whole thing blasted?
craig staff
New Member
- Posts
- 64
- Location
- luton
if you get it blasted all the paint will come off because it gets in to all nooks and crannys
batfink82
New Member
- Posts
- 34
if you are doing just the body panels then nitromoors works a treat. if you are doing the chassis then i would recommend getting a mobile grit blaster to do it for you. I had my chassis and bulkhead blasted with great results...
http://s139.photobucket.com/albums/...rrent=DSC00136.jpg&refPage=&imgAnch=imgAnch10
it took the guy a morning to blast the whole landy down to bear metal, made welding so much easier. I cost about £250.
http://s139.photobucket.com/albums/...rrent=DSC00136.jpg&refPage=&imgAnch=imgAnch10
it took the guy a morning to blast the whole landy down to bear metal, made welding so much easier. I cost about £250.
