SERIES ONE WIPERS.

ciderman · Jan 18, 2018

HI, I FITTED some s3 wiper arms and blades but the wiper motors don't have the strength to wipe across the screen... are the arms too much spring loaded for the motors or are the blades too grippy?

nickjaxe · Jan 18, 2018

Some thing doesn't sound right...was it ok with the old wipers?

Whats it like with a wet screen.

Nick.

rob1miles · Jan 18, 2018

Many old cars wipers won't work dry. Do the arms have 2 settings for the springs, some do.

Blackburn · Jan 19, 2018

Are the brushes ok in the motors?

Bobsticle · Jan 19, 2018

My old series wipers needed me to help them along a bit with the thumb turn in anything but drizzle. Snow was a killer and rendered them almost fully manual.
I never could be bothered finding out why and sold it on years later with the same issue. I have seen refurb kits that may spice the power up a bit.

tottot · Jan 19, 2018

The original series one wipers and arms were rather thin lite items,blades and arms are availble.Original type motors are also available at a price to make you choke.

Hicap phill · Jan 19, 2018

Depending on how much you like the series1. You can put series 3 wiper motor etc on.
My passenger motor does not work so manual operation only This has skinny blade. (Did go 4years without a wiper on passenger side) Driverside has series 3 blade on good Lucas motor. Works well.
Some marine wiper motors fit. These are cheaper

Land Raver · Jan 19, 2018

Sure I've read that the grease in the motor goes hard and benefits from a fettling and re grease

ciderman · Jan 20, 2018

it only had one motor fitted when I got it- on the passenger side. I think the springs may be an issue. thanks for advice chaps.

SERIES ONE WIPERS.

ciderman

Active Member

nickjaxe

Well-Known Member

rob1miles

Well-Known Member

Blackburn

Well-Known Member

Bobsticle

De Villes Advocaat

tottot

Well-Known Member

Hicap phill

Well-Known Member

Land Raver

Well-Known Member

ciderman

Active Member

Similar threads