Series one hard top roof
- Thread starter Garyo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
Depends what you mean by "fettle" Probably a fair bit of work I recon to do. Ask on series one club site.
Land rover were a bit slow presenting a hard top for the series one and now and then have come across after marked ones produced by "local" company's.
Land rover were a bit slow presenting a hard top for the series one and now and then have come across after marked ones produced by "local" company's.
Hicap phill
Well-Known Member
- Posts
- 16,237
- Location
- Wiltshire
Easier to get truck cab canvas.
If you are going to build from an 86…
Put on sides & trim the excess off the area by the door.move any of the edges and brackets back to suit.
Roof.. attach to the front windscreen and remove the excess above the rear door. Replace the door/end
And 107 truck cabs don’t fit either
As per attached have both types of canvas.
If you are going to build from an 86…
Put on sides & trim the excess off the area by the door.move any of the edges and brackets back to suit.
Roof.. attach to the front windscreen and remove the excess above the rear door. Replace the door/end
And 107 truck cabs don’t fit either
As per attached have both types of canvas.
Hicap phill
Well-Known Member
- Posts
- 16,237
- Location
- Wiltshire
I thought that when I posted it… it’s the fence behind the motors which looks like a tow rope.Whos towing who? or is it tug of war.
J
I trust my spannering & don’t carry a rope
