Series brake pedal spring

Padda.116 · 2025-01-08T20:33:41+0000

Hi all,

I need to renew the brake pedal spring as it’s not pulling the pedal back into its resting position anymore. I have attached a picture of the clutch pedal and the brake pedal could someone please give me a link for both of them OEM please.

A quick side note. Is this the correct front lower grill valance for a 1963 2A (bit of a mongral anyway) and I know the 2 bolt holes have snapped off how did people repair that and where does it bolt on the chassis?

Thanks!!

Gun7354 · 2025-01-08T21:09:07+0000

Try John Craddock's matey

https://www.johncraddockltd.co.uk/series/series-2/parts/brakes/

Rich

tottot · 2025-01-08T21:32:24+0000

Check the pedal pivot points are free moving. Not the correct valance, 63 would be flat topped.

Rangieman123 · 2025-01-08T21:45:11+0000

Your spring doesn't look to be the worst. I'd second the idea of properly lubricating the pedal pivots.
Your valence panel is off a 2A. I've removed mine, as it let's me stand between the bumper and grille when spannering.

tottot · 2025-01-09T11:06:11+0000

Your valance is from later 2a post 66

Wildefalcon · 2025-01-09T15:42:59+0000

Budget for a new master cylinder.

Series brake pedal spring

Padda.116

Member

Attachments

Gun7354

Well-Known Member

tottot

Well-Known Member

Rangieman123

Well-Known Member

tottot

Well-Known Member

Wildefalcon

Well-Known Member

Similar threads