Series 3S Help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
TannersLandy

TannersLandy

New Member
Posts
7
Location
TN, USA
Hello Everyone,

Hoping you could shed some information on my Land Rover.

I have what I believe to be a 1984 Series IIIS, a former military truck from SA, with the straight 6 petrol 2.6L engine (R6).

Any info you have on these trucks would be greatly appreciated. Anyone have any pictures of their military use or info of their history?

Also, I have been unable to find a VIN or Chassis number. There is no identification plate on either side of the bulkhead and no luck around the chassis or spring hanger, any suggestions?

My goal right now is to replace the throw-out bearing and pilot bushing. Just don't want to order the wrong parts.

Any info you can give is GREATLY appreciated,

Tanner Langley
6D74C181-EF88-4FA4-A99F-47F0B7491956.jpeg 639C37E6-ABE7-43A2-8E1E-1F8DDFBACB2E.jpeg D7F2EB9F-19F9-487A-831D-0D20066E97CC.jpeg A47F3786-950F-4379-ACB3-E477B537DF05.jpeg
 
marjon said:
I might be wrong but that engine just isn't right. It isn't a land rover engine:confused:
Calling help @Turboman @BruceB

J
Click to expand...
Not really.

I assume the SA in his post means South Africa, and I do know that many Land Rovers were sold there, and, I believe, built there from CKD kits.

But I don't know how many, or if, were sold to the Sout African vehicles, or what engines were fitted to any models sold there.

And my knowledge of military Land Rovers is limited. I have never been in the military, or owned any kind of military vehicle.
 
Turboman said:
Not really.

I assume the SA in his post means South Africa, and I do know that many Land Rovers were sold there, and, I believe, built there from CKD kits.

But I don't know how many, or if, were sold to the Sout African vehicles, or what engines were fitted to any models sold there.

And my knowledge of military Land Rovers is limited. I have never been in the military, or owned any kind of military vehicle.
Click to expand...

That's the thing if its a "kit " built what engine would they use?

Which is the reason he is struggling for a manual for it.

But that isn't a 6cylinder LR engine?
J
 
marjon said:
That's the thing if its a "kit " built what engine would they use?

Which is the reason he is struggling for a manual for it.

But that isn't a 6cylinder LR engine?
J
Click to expand...
6 cylinder Rover petrol engines were fitted to civilian Series 2a and 3s sold in the UK.

I think they were also fitted in some Forward Control Series, which were military vehicles.

What went on in South Africa, I have little or no idea.
 
Turboman said:
6 cylinder Rover petrol engines were fitted to civilian Series 2a and 3s sold in the UK.

I think they were also fitted in some Forward Control Series, which were military vehicles.

What went on in South Africa, I have little or no idea.
Click to expand...

Appreciate the help!
One gentleman suggested that "it's the straight 6 used in the SD1, derived from the Australian p76 engine. The S3S used a Santana gearbox with different 1st, 3rd and reverse ratios. Might help to look for Santana parts."

Does this sound correct or possible to you guys?
 
TannersLandy said:
Appreciate the help!
One gentleman suggested that "it's the straight 6 used in the SD1, derived from the Australian p76 engine. The S3S used a Santana gearbox with different 1st, 3rd and reverse ratios. Might help to look for Santana parts."

Does this sound correct or possible to you guys?
Click to expand...
I would think a post in the Military Vehicles section on the forum would be a good idea.

And try and include some clear pictures of the vehicle from all angles, and under the bonnet.
 
Wildefalcon said:
That's not a UK Landrover sourced engine. The UK 6 cyl had s smooth rocker cover, and the carb on the other side.
Click to expand...
Didn't see the pics earlier, not sure if they have been added, or I just missed them among the ads.

You are quite right, that is not a 6 cylinder Rover engine. In the pic, it has the look of an OHC engine, but the pic is too small to be sure.
 
Suggest you find a SA forum. You might need to make friends that can post parts to you, or at least measure then so you can get made locally.
 
You must log in or register to reply here.

Similar threads

joerowelll
Anyone have information about how Series 3s perform in accidents? Any documented history?
Replies
17
Views
1K
Bobsticle
Bobsticle
pabloako
Air Filter / Battery Tray installation
Replies
3
Views
392
pabloako
pabloako
VikingRider
1974 series 3 dashboard retrim advise
Replies
3
Views
1K
Bobsticle
Bobsticle
Bezdonian
Potential new Series 2a owner with questions on powerplant and drivetrain
5 6 7
Replies
127
Views
15K
Rangieman123
Rangieman123
G
Dating my Series 2A
Replies
16
Views
3K
Guidoma
G
Back
Top