Series 3 steering box oil specification

Olly_Webb · Mar 17, 2019

Good afternoon all, I've scoured the threads on LZ but I can't find anything about the type and amount of oil you need to put in a series 3 steering box after you've rebuilt it.

Also, I've greased the bearings with a standard Castrol bearing grease but I was a bit concerned this might react with any oil I put in it afterwards.

As ever, any help very much appreciated.

Cheers.
Olly

jamesmartin · Mar 17, 2019

ep90 or above or cv grease (one shot grease stc3435)

Olly_Webb · Mar 17, 2019

Excellent, right I'll get some of that ordered. How much do I need to put in? A bottle is 370g.

Thanks so much for getting back so quickly, much appreciated!

rob1miles · Mar 17, 2019

Get a gallon / 5L of EP90 GL4, (Not GL5), you can get in on e-bay of your local motor factors should stock it. They tend to have GL5 on the shelves because its for modern vehicles but they usually stock GL4, it common on tractors and machinery as well as Land Rovers. As its the oil that goes in the axles, swivels, gearbox and transfer box you will always get through it and it works out under £20 for 5L delivered:
https://www.ebay.co.uk/itm/Smith-Al...m4671bf47f0:g:-9YAAOSwnCFaBc6X&frcectupt=true
.

Olly_Webb · Mar 17, 2019

Hello Rob, that's ace. Any idea how much I should put in the steering box? Cheers

rob1miles · Mar 17, 2019

Others will correct me but I seem to remember filling mine up.

Extreedoc · Mar 18, 2019

I won't correct you Rob, cos you're right. Fill it to the bottom of the threads.

Series 3 steering box oil specification

Olly_Webb

Member

jamesmartin

Well-Known Member

Olly_Webb

Member

rob1miles

Well-Known Member

Olly_Webb

Member

rob1miles

Well-Known Member

Extreedoc

Well-Known Member

Similar threads