Series 3 Intermittent Stalling

Blackburn · Dec 6, 2019

The ends of the hoses on the fuel filter look a little suspect but not leaking.
Usually the ignition coil would be fitted with HT coming off the base ie vertically with connections on base , originals where oil filled with transformer type oil.
Did a web search and some show horizontal others angled some vertical.
What make is that coil and was there any instructions re fitting?

wingertzahn · Dec 11, 2019

Blackburn said:
The ends of the hoses on the fuel filter look a little suspect but not leaking.
Usually the ignition coil would be fitted with HT coming off the base ie vertically with connections on base , originals where oil filled with transformer type oil.
Did a web search and some show horizontal others angled some vertical.
What make is that coil and was there any instructions re fitting?

So it is a Bosch coil - brand new. Fitted to the bulkhead in the same manner as the one it replaced. No instructions but the clamping bracket mounting holes in the bulk head orientate the coil as it is - I would have to drill new mounting holes to fix it vertically. Anyway - seems to be performing ok as it is.

Series 3 Intermittent Stalling

Blackburn

Well-Known Member

Attachments

wingertzahn

Member

Similar threads