Series 3 Brake Pedal / Master Cylinder adjustment - PLEASE HELP!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Colthebrummie said:
If the pedal feels a bit spongy, there is probably some air still in the system. Getting the last bit out is a pain. Try using a length of wood to hold the pedal hard down, wedge the wood under the steering wheel and leave it overnight. That can often force the air out.

Col
Click to expand...
presumably with one (or more?) of the bleed nipples open? The one furthest from the reservoir?
 
No, all bleed nipples should be closed. With constant pressure on the brake peddle, e.g. Overnight, the pressure in the system can often force any remaining air back into the reservoir. Doesn't always work but I've had good results with doing it.

Col
 
As yours is a 109 it should have twin leading shoes, these are notorious for not bleeding well. I had an ex mod 109 once and I tried all things to bleed the system, in the end I swapped the position of the bleed nipple from the bottom wheel cylinder to the top ( I had to make 2 new pipes to re route the system) When I bled them, got a great pedal straight away.
See here for more bleeding tips:
https://www.lrukforums.com/threads/correct-way-to-bleed-brakes.22143/
And here:
https://forums.lr4x4.com/topic/75617-11-front-brake-bleeding-improvements/
 
wireman said:
I had an ex mod 109 once and I tried all things to bleed the system, ......
Click to expand...

I struggled with my 109 too. To get the standard brakes to bleed, I took both front drums off, backed the adjusters fully OFF, and then tied ratchet straps round the shoes pulling them tightly in, fully pushing the wheel cylinder pistons back into their bores. Then a couple of pumps of the pedal saw lots of air come out, and when I put the drums back on and adjusted the shoes, I got a good pedal.
 
I have twin leading shoes On mine and replaced all bits with new earlier this year bled normally and once bedded in the front brakes are getting better all the time front end now dips when I brake!
 
Thanks gents for all the responses - will let the brakes settle after last bit of adjustments and then if need be follow advice for improved bleeding. Much obliged to you all!
 
You must log in or register to reply here.

Similar threads

A
Series2 Brakes CB MS
Replies
3
Views
587
Ant107
A
Rangieman123
Lightening the effort of a Series 2 and 2A clutch pedal
Replies
0
Views
487
Rangieman123
Rangieman123
Padda.116
Series brake pedal spring
Replies
6
Views
1K
Fatrover
Fatrover
C
Brakes a bleeding nightmare
Replies
13
Views
690
Chrisandtaba
C
Moosekeeper
Series 3 Clutch Master Cylinder Dimensions
Replies
0
Views
735
Moosekeeper
Moosekeeper
Back
Top