series 2a headlight outer trim ring removal

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

old109er

Active Member
Posts
104
Location
Kirklington. ( Newark on trent)
how on earth do you get the headlight outer bezzel off.

no external screws all round only a couple of small holes at the bottom.

can push and twist headlight unit on spring mounts but the bezzel is stuck!!??

want to do my light swap before winter but stuck at this first hurdle.

cheers in advance
 
Dunno if this is any help

normal_series-2a-3-parts-000032.jpg
 
The outer trim rings should have a screw on the bottom to hold the ring in place, and the top side is on raised hook sections that are part of the headlight bucket or attached to it - they are not supported on the headlight or the adjusting mechanism.

As you talk of holes in the bottom it sems to me the screw is alreay out/gone and the damn thing was jammed in place. Might be worth a gentle pry on the bottom to see if it will pop off.
 
Last edited:
Back
Top