Series 2a front panel

Trumar · Oct 7, 2021

Hello all, the front panel on my series 2a 1971 is missing the 2 x little black stoppers that go each side of the panel. Has someone got a couple of spares or do anyone know where I can get them from please? I have just asked Paddocks spares and they say “NO”

Blackburn · Oct 7, 2021

Which panel?
A photo would help

Trumar · Oct 7, 2021

Not mine but this is the front panel.

steve2286w · Oct 7, 2021

Mine had a couple of screws holding it on

tottot · Oct 7, 2021

Don't know what you mean. The panel from my 2a is just like the one in the pic with nothing attached to it.

Bobsticle · Oct 7, 2021

I had to put another hole in the front of mine so the welding rod that holds it on could hook through it

Bobsticle · Oct 7, 2021

I bet it had spot lights nailed to it.

Blackburn · Oct 8, 2021

He is looking for the part bottom right in pic above 310877 .
I suppose its there to deaden any rattle from the wing.

steve2286w · Oct 8, 2021

Them bits available too if googling part number. I wish that was the only issue I had !

Beneagles · Oct 8, 2021

Blackburn said:
He is looking for the part bottom right in pic above 310877 .
I suppose its there to deaden any rattle from the wing.

I wasn't even aware that I was missing those

Bobsticle · Oct 8, 2021

Big gob of silicone

Trumar · Oct 12, 2021

Blackburn said:
He is looking for the part bottom right in pic above 310877 .
I suppose its there to deaden any rattle from the wing.[/QUOTE

Blackburn said:

He is looking for the part bottom right in pic above 310877 .
I suppose its there to deaden any rattle from the wing.

Click to expand...

Thank you sir they are what I was asking for. Can I ask what online parts catalogue you Use?

Trumar · Oct 12, 2021

tottot said:
Don't know what you mean. The panel from my 2a is just like the one in the pic with nothing attached to it.

On each side of the front panel is a hole for a rubber stopper to help with the rattle of the wing against the front panel.

Palagius · Oct 12, 2021

mouldable plastics such as formcard,polydough or the one pictured are the biz,i have repaired the insides switches etc and are ideal for the nylon panel inserts,

Series 2a front panel

Trumar

Active Member

Blackburn

Well-Known Member

Trumar

Active Member

steve2286w

Well-Known Member

tottot

Well-Known Member

Bobsticle

De Villes Advocaat

Bobsticle

De Villes Advocaat

Blackburn

Well-Known Member

steve2286w

Well-Known Member

Beneagles

Well-Known Member

Bobsticle

De Villes Advocaat

Trumar

Active Member

Trumar

Active Member

Palagius

Well-Known Member

Similar threads