Series 2 leaf spring replacement
- Thread starter JoeTanner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
minecab
Active Member
- Posts
- 156
- Location
- milton keynes
put axle stands under chassis and remove wheels. when you bolt up new springs leave loose until on the ground , roll it back and forward then tighten up the bolts.
Hi thank for reply having trouble getting lower shock mount to slit into locating point
steve2286w
Well-Known Member
- Posts
- 4,523
- Location
- monkeyangerland
http://www.retroanaconda.com/landrover/2010/03/series-iii-workshop-manual/
hi here’s the workshop manual, sections on removing axle and springs , may need to take care on getting bolts out of springs on my series 3 nut comes off but still need to unscrew bolt
If your just replacing springs should be able to do them one at a time
Are the swivel chrome ballls ok
Any pics they’re always welcome
hi here’s the workshop manual, sections on removing axle and springs , may need to take care on getting bolts out of springs on my series 3 nut comes off but still need to unscrew bolt
If your just replacing springs should be able to do them one at a time
Are the swivel chrome ballls ok
Any pics they’re always welcome
nickjaxe
Well-Known Member
- Posts
- 821
- Location
- North Cheshire/Merseyside
Why are you changing the springs?
