Freelander 1 Serial number location

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
This is off the britpart one I just acquired
 

Attachments

  • 0EDB103A-FECA-49B3-B9FC-3743D91AF13F.jpeg
    0EDB103A-FECA-49B3-B9FC-3743D91AF13F.jpeg
    265.8 KB · Views: 104
This is off the britpart one I just acquired
2015 then.
When fitted do the One Wheel Up Test OWUT with a 1.2m bar and 8kg to see how it performs. You'll need to turn it one full revolution to mix round the fluid as it's new and been sitting a while. You can do this by performing the test 3 times once fitted, then time it on the 4th test.
 
2015 then.
When fitted do the One Wheel Up Test OWUT with a 1.2m bar and 8kg to see how it performs. You'll need to turn it one full revolution to mix round the fluid as it's new and been sitting a while. You can do this by performing the test 3 times once fitted, then time it on the 4th test.[/QUOTE
I only bought this as was extremely cheap and if I was honest I expected a old one with a rattle can refurbishment paint job to turn up in a box
I have my original vcu also good working order and one I bought this year that came with full prop all bearing and joints in outstanding condition that’s on my Freelander now
So I am thinking of getting new GKN bearings and front back prop parts when I see them on offer and making a new complete shaft so probably not this year
 
Back
Top