pete980
Member
- Posts
- 93
Security
- Thread starter pete980
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
Never seen or heard of it 
what is it?
what is it?
pete980
Member
- Posts
- 93
Never seen or heard of it
It is a Clifford thatcham aproved gear lever lock had it fitted in my old escort s1 rs turbo many moons ago then had it removed by locksmith when i sold the car been sitting in a box in the garage for a few years now
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
It's quite a bit more elaborate than the x-eng gear lock for a fender
pete980
Member
- Posts
- 93
it is quite a solid bit of kit & has snap off bolts so once fitted cant be removed easily
But might have to make a bracket to weld to the chassis to get it in the right place
But might have to make a bracket to weld to the chassis to get it in the right place
SteNova
Well-Known Member
- Posts
- 2,200
- Location
- N. Wales, LL22
I removed one from a Nissan sunny gtir with a hammer in about 30mins, they are a solid bit of kit and it was easier to smash the car to bits than attack the device directly
on a defender I would want to toughen up the gearstick with some stainless tube slipped over it or weld some rebar to it to prevent easy cutting
on a defender I would want to toughen up the gearstick with some stainless tube slipped over it or weld some rebar to it to prevent easy cutting
Last edited:
pete980
Member
- Posts
- 93
Decent enough deterant then if it took 30mins to smash it off
Like the gearstick strenthening idea
g-mack
Active Member
- Posts
- 161
- Location
- morpeth northumberland
i had one of these on my rs turbo 20 year ago!! good bit of kit back then.
