Security on hinges and hood

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
vasimone

vasimone

Active Member
Posts
197
Location
Accra, Ghana, West Africa
Hello guys,

I would like to replace the bolts on the hinges and hood since the ones i have are the standard one that any fool with a screwdriver can take out - do you have any that you can recommend? please confirm also the size needed for a 1995 Defender

Thanks so much,
Simone
 
To be fair you don't need security bolts at all, a rubber mallet will do the job nicely.

Batter every panel to within an inch of it's life with the rubber mallet so they are all dented and not in an "easily straightened out" way.

They don't nick them ones, no money in an old beat up door, bonnet or wings ;)
 
nice idea! I would still prefer to go with the security bolts - more than being worried for them nicking the doors or bonnet, I wouldn't want them to get in the car/engine as easily :)
 
vasimone said:
nice idea! I would still prefer to go with the security bolts - more than being worried for them nicking the doors or bonnet, I wouldn't want them to get in the car/engine as easily :)
Click to expand...

Erm?

hasp and staple.JPG
 
vasimone said:
Hello guys,

I would like to replace the bolts on the hinges and hood since the ones i have are the standard one that any fool with a screwdriver can take out - do you have any that you can recommend? please confirm also the size needed for a 1995 Defender

Thanks so much,
Simone
Click to expand...
I take it Defenders or parts of are popular to steal over there too? :(

vasimone said:
and these one for the bonnet:

cheers,
Simone
Click to expand...
Much better than that Merkin Hood nonsense! ;):p
 
@AI2O3 what do you mean by Merkin hood?

Honestly here they wouldn't steal the hood/doors but the car altogether - I am putting a few securities just in case..

@bluebeasty what do you mean by the second one? the door hinge on ebay or the ones for the hood?

Cheers,
Simone
 
vasimone said:
@AI2O3 what do you mean by Merkin hood?

Honestly here they wouldn't steal the hood/doors but the car altogether - I am putting a few securities just in case..

@bluebeasty what do you mean by the second one? the door hinge on ebay or the ones for the hood?

Cheers,
Simone
Click to expand...
Merkins is short for Americans
Hood is what the merkins call a bonnet.
 
@blue beasty what do you mean by second kit?

I also found these two:
DOOR HINGES: Nice as these have a head that needs a special screw driver to open. The auction says --> These Parts Are Metric And Suit Later 1998 Onwards Defender. Can Be Used On Earlier Models To Replace 5/16UNF Parts If The Correct J-Nuts And Plain Nuts Are Used --> what does it mean?
BONNET: I guess are compatible with all Defenders or they come in different sizes?

Mine is a 1995 110

Cheers,
Simone
 
vasimone said:
@blue beasty what do you mean by second kit?

I also found these two:
DOOR HINGES: Nice as these have a head that needs a special screw driver to open. The auction says --> These Parts Are Metric And Suit Later 1998 Onwards Defender. Can Be Used On Earlier Models To Replace 5/16UNF Parts If The Correct J-Nuts And Plain Nuts Are Used --> what does it mean?
BONNET: I guess are compatible with all Defenders or they come in different sizes?

Mine is a 1995 110

Cheers,
Simone
Click to expand...

The door security screws, much better than a plain torx.
 
You must log in or register to reply here.

Similar threads

Milleme
Landy security....attempted break in
Replies
10
Views
300
Mickob71
Mickob71
L
Rear Step Bolts?
Replies
5
Views
275
Lucy46
L
H
Security Door Hinges? - Cost an arm & a Leg
Replies
16
Views
2K
Tirran
Tirran
I
L322 Rattling from hood on uneven roads and intermittent 'Air Susp. Inactive'
Replies
18
Views
2K
marjon
marjon
spins
Cylinder Head Overhaul
Replies
6
Views
557
steve2286w
steve2286w
Back
Top