security chip in remote

Corne215

Member

Posts

15

Location

South Africa

• Oct 22, 2023

• #1

security chip in remote

Hi guys i have a Landy d1 98
Drove the truck yesterday but this Moring got in waited for glow plug light to go then i notes' that the security key light is flashing .
is there anyway to bypass that or must i take it in to a moto lec

 

S

Shedload

Well-Known Member

Posts

383

Location

Liverpool

• Oct 22, 2023

• #2

If it just the battery then all you need is a new battery fitted.

 

Corne215

Member

Posts

15

Location

South Africa

• Oct 23, 2023

• #3

Shedload said:

If it just the battery then all you need is a new battery fitted.

Click to expand...

hi there got new battery but still not working busy removing the complete alarm

 

kermit_rr

Very

Full Member

Posts

33,962

Location

North Shropshire

• Oct 23, 2023

• #4

Button stuck on/dirty contact?

 

discool

Well-Known Member

Posts

13,628

Location

Sector 12 in Kent, The Garden of England

• Oct 23, 2023

• #5

Corne215 said:

hi there got new battery but still not working busy removing the complete alarm

Click to expand...

Removing the security ecu will certainly remove the led flashing, its also possible that you will loose central locking and that the engine will fail to start, that will be due to loosing control of the immobilise if both items are fitted to your disco and were previously functioning.

 

S

Shedload

Well-Known Member

Posts

383

Location

Liverpool

• Oct 23, 2023

• #6

I only really have experience with the D2, but believe damp in the module is a common fault. Does the Discovery 1 have an EKA code as the D2 ? If so this will give you a pointer as to what is wrong.
Also the D2 has a transponder on the ignition switch which can lead to similar faults.
I would be wary of removing the alarm system unless you know how to bypass it.

 

Corne215

Member

Posts

15

Location

South Africa

• Oct 24, 2023

• #7

Shedload said:

I only really have experience with the D2, but believe damp in the module is a common fault. Does the Discovery 1 have an EKA code as the D2 ? If so this will give you a pointer as to what is wrong.
Also the D2 has a transponder on the ignition switch which can lead to similar faults.
I would be wary of removing the alarm system unless you know how to bypass it.

Click to expand...

I'm taking the truck to a auto, don't want to destroy. My truck by any means.

But thank you for all the reply's.