Seat risers for early 90

J

jubbjubbbird

New Member

Posts

9

• Jun 2, 2018

• #1

I’m after seat risers for my 1986 90 but I can’t seem to find any that fit the early seats, as they have screws rather than the bolt fitting of the later models. See attached pic.

Does anyone know of a supplier or is it a case of making some?

 

RobV8Defender

Active Member

Posts

79

Location

Glastonbury

• Jun 3, 2018

• #2

Hi there,

Cannot help you on sourcing off the shelf parts - BUT - I would share with you that I fitted some to my 1998 Defender and found out that it made (for me) the driving position impossible.

I found that the sun visor was eye level so I was stooping all the time, also, to look out of the side window I had to look down to see out.

I'm only 5'10, so not particularly tall or anything like that - suggest that you try driving on a cushion of the same height as the risers and see how it is for you.

Good luck with your project.

 

saxavordian

Well-Known Member

Posts

9,289

Location

Behind the canvas in Manchester, England.

• Jun 3, 2018

• #3

I think there from Mud UK the seat risers I had a pair for my 110 Driver seat. It helps in the legs a bit not much. I think you could get away with some box steel tubing from a local sheet metal worker to be fair.

 

TorsionBhudda

Well-Known Member

Posts

1,342

Location

Falkirk

• Jun 3, 2018

• #4

jubbjubbbird said:

I’m after seat risers for my 1986 90 but I can’t seem to find any that fit the early seats, as they have screws rather than the bolt fitting of the later models. See attached pic.
View attachment 150450
Does anyone know of a supplier or is it a case of making some?

Click to expand...

Never seen seat mountings like that before must be a very early design. I had seat risers fitted to my defender and as RobV8 I found them to be hopeless always having to stoop down to see out side windows at junctions and if used thee sunvisors then couldn't see out windscreen. I got them from Exmoor Trim but they have now been removed and sold. I have now fitted a Bulkhead removal bar from YRM and this has worked giving me the extra legroom I was after and was easy to fit.

https://yrmit.co.uk/product/bulkhead-removal-bar-land-rover-defender/

 

M

Mingus

Active Member

Posts

133

• Jun 3, 2018

• #5

I've got these early seat runners as well. mudrails wont fit but you could either change your runners for a later type or back up your on own for the existing runners. btw i'm 6'0 and fitted risers to my 98 110, had no problems and extra legroom was,great.