Seat height adjustment

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Flying Scotsman!

Active Member
Posts
136
Location
sunderland
Might be a silly question, but does anyone know of a way to lower the passenger seat?
(And before you ask, no it hasn't got height adjustable seats!)
Problem is the son in law is 6 foot 6 and has to slouch down to avoid smacking his head off the roof.
Is there a adjustment that can be made?
 
The Freelander without a sunroof has and extra 1" of headroom as there's no roof mechanism to accommodate.
I expect the seat frame could be cut and rewelded. However it would need to be strong as the belt is anchored to it.
 
The Freelander without a sunroof has and extra 1" of headroom as there's no roof mechanism to accommodate.
I expect the seat frame could be cut and rewelded. However it would need to be strong as the belt is anchored to it.

That's what I suspected.
Welding shouldn't be an issue. I work for an engineering firm with skilled welders so that's a possibility.
Think I'l find a weekend to take it out and have a think about it.

Cheers guys.
 
It may be that they are not meant to be modified due to safety issues with restraints and air-bags etc.
 
It's not a straight cut chopping a piece out of the seat base, I have one in bits at the moment. My initial thoughts are that you can only take about an inch and a half out of the base.
 
Meh!
"Safety , schmafety..." what's life wthout a little risk?
(I should point I'm a H+S manager...but I ony do that office hours, Monday to Friday)
You do realise everything on this forum is scanned by H&S management for UK PLC and anyone making dangerous suggestions will be
dragged before the H&S demigods and forced to do a H&S assessment of every aspect of their lives. You'll be tangled up in H&S red tape for the rest of your life for such crazy talk!!!!!

PS you're not the first to complain about the height of the seat. For us normal folk it is fine, indeed I find them extremely comfortable but for freaks like your son in law, a little less so. If cutting bits off him is not acceptable then the only answer is to shoot him and put him out of everyone's misery.
You could replace the seat with a height adjustable one from another make of car or cut and weld the frame you have but they seem like very extreme measures to me. The first solution is much more sensible.
 
Last edited:
You do realise everything on this forum is scanned by H&S management for UK PLC and anyone making dangerous suggestions will be
dragged before the H&S demigods and forced to do a H&S assessment of every aspect of their lives. You'll be tangled up in H&S red tape for the rest of your life for such crazy talk!!!!!

PS you're not the first to complain about the height of the seat. For us normal folk it is fine, indeed I find them extremely comfortable but for freaks like your son in law, a little less so. If cutting bits off him is not acceptable then the only answer is to shoot him and put him out of everyone's misery.
You could replace the seat with a height adjustable one from another make of car or cut and weld the frame you have but they seem like very extreme measures to me. The first solution is much more sensible.
Always the forum voice for practical and sensible solutions :)
 
Always the forum voice for practical and sensible solutions :)
Sounds prefectly reasonable to me.

You do realise everything on this forum is scanned by H&S management for UK PLC and anyone making dangerous suggestions will be
dragged before the H&S demigods and forced to do a H&S assessment of every aspect of their lives. You'll be tangled up in H&S red tape for the rest of your life for such crazy talk!!!!!

Bring ot on... I produce a fair bit myself and I challenge anyone to have more tangly red tape than me.(And mine is sticky too)

us normal folk -- Debatable....

I find them extremely comfortable - me too.

but for freaks like your son in law, - agreed.

If cutting bits off him is not acceptable then the only answer is to shoot him and put him out of everyone's misery.- Dont tempt me...

You could replace the seat with a height adjustable one from another make of car - That costs money, I'm scottish, it's not happening.

or cut and weld the frame you have but they seem like very extreme measures to me. - Wimp!. sounds prefectly reasonable to me.
 
Back
Top