Seat belts for P38 Overfinch 7 seat conversion

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Clarky130

Clarky130

New Member
Posts
3,957
Location
Chippenham, UK
Have just purchased one of the above from a fellow LZ member, and I am delighted with it so far. However, seller didn't have any seatbelts to go with it.

Anybody know where I can get a pair of suitable belts, and how they should be fitted?
 
Don't know who makes the seats they came with the car. They are same leather and trim as rest of seats and have lap and diagonal belts. Car is not an Overfinch but has all the proper wood trim in it. So somebody spent a lot of money on it new.
 
Ok, all sorted. The belts I ordered yesterday came to day, and took me about 30 mins to fit ( aside from a short break to stem the heavy bleeding caused by my ineptitude with a Stanley knife!!!)

I mounted the buckle sections to the inboard bolts on the rear seat latch rails - cut back a bit of carpet and cut some space out of the foam sound deadening for the brackets. I then mounted the 'tongue' section to the existing lower mount points for the rear seatbelts, using the mounting bolts supplied with the belts - they were slightly longer than the originals on the RR:

41fed756.jpg


25f0dd58.jpg


454224e9.jpg


a4941a1e.jpg


And the finished article:

82d088d4.jpg


Next job will be to add an internal tailgate release button. Anybody done one, or know how?
 
Last edited:
You must log in or register to reply here.

Similar threads

S
Centre seat seatbelt
Replies
7
Views
537
Hicap phill
H
S
seat backs questions
Replies
8
Views
564
grewth
G
dag019
Seat belt bolt/fitting kit
Replies
1
Views
181
julianf
julianf
dag019
station wagon second row seatbelts
2
Replies
24
Views
975
dag019
dag019
ar1g3
P38A P38 rattle at idle
2
Replies
26
Views
3K
roythebus
R
Back
Top