nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
Rust, Welding and Numpty Questions
- Thread starter Chrisw8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Re-fitted interior bits....including new sound proofing made from 'closed cell' stuff.
gave bumper inside and end of Chassis, 2 coats bonda primer
does anyone know if bog standard evo stick contact adhesive will be ok to stick this bit down ??
gave bumper inside and end of Chassis, 2 coats bonda primer
does anyone know if bog standard evo stick contact adhesive will be ok to stick this bit down ??
- Posts
- 7,877
- Location
- East Midlands
Don't see why not. Glue it and put something heavy on it while it sets.
greyhair
Well-Known Member
- Posts
- 1,303
- Location
- IN MY SHED
Cracking job
when I started reading this I felt for you, rust and holes everywhere
but you have done it another skill learned
when I started reading this I felt for you, rust and holes everywhere
but you have done it another skill learned
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Thanks greyhair,
It was a daunting task, and I should have scrapped it, but buying another one would have probably been just as bad. The motor/mechanics are all good, as I've got a shed load of receipts from the previous owner.......anything wrong and they took it straight to the garage, so hopefully I'll have no problems there.!!
I know the n/s front is almost as bad , but I know what I'm doing now, and hopefully it won't take as long to do next year.
.......... Then there's the rear to look at, leaky sunroofs ......lol
It was a daunting task, and I should have scrapped it, but buying another one would have probably been just as bad. The motor/mechanics are all good, as I've got a shed load of receipts from the previous owner.......anything wrong and they took it straight to the garage, so hopefully I'll have no problems there.!!
I know the n/s front is almost as bad , but I know what I'm doing now, and hopefully it won't take as long to do next year.
.......... Then there's the rear to look at, leaky sunroofs ......lol
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Just given the o/s of bumper 3 coats of rattle tin satin spray.
I got good coverage etc. but not being familiar with spraying........is that enough ?
I got good coverage etc. but not being familiar with spraying........is that enough ?
