theflyingvegetable
Member
- Posts
- 92
Well that's the wing welded up into one part, seam sealed and two coats of bonda primer on it. Beer O clock.
Disco 1 Rust! Inner wing question
- Thread starter theflyingvegetable
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
theflyingvegetable
Member
- Posts
- 92
Wing fitted. Bit of a mission. Tomorrow time to put it together and see if everything fits. Brace yourselves, if the bonnet doesn't fit then you'll probably hear the swearing from wherever you are in the world.
And I think I'm still off my tits on paint fumes.
Happy with some bits of the job, not so happy with others where I couldn't quite seem to get things to fit right, or where I've had to cut corners due to time pressure
And I think I'm still off my tits on paint fumes.
Happy with some bits of the job, not so happy with others where I couldn't quite seem to get things to fit right, or where I've had to cut corners due to time pressure
theflyingvegetable
Member
- Posts
- 92
Car back home! Pics.
Begin.
About a million spot welds later. Much easier to just chomp the whole thing off and then get the other bits off.
bah.
Begin.
About a million spot welds later. Much easier to just chomp the whole thing off and then get the other bits off.
bah.
theflyingvegetable
Member
- Posts
- 92
welded, load of primer
new wing on
anyone know what these are for?
- Posts
- 83,282
- Location
- Embasinga stocæ
headlight adjuster? fog light? side repeater?
- Posts
- 68,232
- Location
- The Wooly Witch
Have a look on the other side, might give you a clue ...
theflyingvegetable
Member
- Posts
- 92
Not headlight adjuster, don't think they are fog light (though there are some spare ones for those), and not side repeater. Couldn't see any similar ones used or not on the other side.
Zed.
Well-Known Member
- Posts
- 1,842
- Location
- Deepest Bandit country (Wales)
As to the Spare wires, ones not for coolant expansion tank level? (Although my d1's are both 200 series so different looms)
Innerwing looks good
Rich.
Innerwing looks good
Rich.
theflyingvegetable
Member
- Posts
- 92
Don't think so... end bit of loom near headlight box, coolant tank is way further back
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Bumper spotlights ????
ant.7
Active Member
- Posts
- 213
- Location
- gatley, cheshire
theflyingvegetable
Member
- Posts
- 92
Looks less bodgy than mine
GRATCH
HUGE MEMBER
- Posts
- 15,475
- Location
- North Cheshire
