RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Sorry, forgot to mention - my 95 is a P38 not classic. But suspension is suspension.
RRC with 2" lift - How do I make it drive nicely!
- Thread starter DaveRRC
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mine is lifted too, by the previous owner so. Is running on 235/85R16 MTs at the moment. Not to bad on road, even without anti roll bars. Has double shocks in the back and heavy duty springs. Besides a slight tendency of under steering and the too hard rear suspension when empty not quite nice. Not that I have much to compare it against. Off road the rear suspension is too hard IMHO. Not sure if that helps.
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
Ahh but suspension isn't just suspension. The classic has different set up with the V frame and Boge self levelling unit.
Not wishing to get into yet another air/coil debate but the P38 set up is structured to work on air so you'll always be behind the handling capabilities.
For example look of at any classic and there will be a suspension lean as the transfer box is not centre line. the Boge self levelling unit is not on a p38.
Western Slope Rover
Well-Known Member
- Posts
- 4,073
- Location
- On a mesa
I have a 2 inch lift on my 93 LSE. It's Bilstein, coils and shocks and it's fine.
