RRC Front Radius Arm Bracket

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

EL_3grab

New Member
Posts
4
Location
UAE - AJ
Hello Guys

I'm in the process of rebuilding my 2dr 81" RRC

The front right radius arm bracket is completely rusted out


img1083hhj.gif


img1082hhj.gif


img1081hhj.gif



the only replacement I could find is the one from the 90/110 chassis part# STC8604


ddddg.gif



Can I use it on my RRC?

The RR in question

img1089hhj.gif


Cheers

Ghanem
 
hello and welcome to landy zone, while I would guess it should fit-unless someone says for definite.
If you get stuck we could always get the tape measure out later-because I have a 110
 
hello and welcome to landy zone, while I would guess it should fit-unless someone says for definite.
If you get stuck we could always get the tape measure out later-because I have a 110

Thanks :)

I will visit the scrap yard and compare both, to be 100% sure
 
So if I put my four door body and running gear on a pre 73 three door chassis for obvious reasons ;) is that where I would have to have it checked out for safety before its first MOT?
 
So if I put my four door body and running gear on a pre 73 three door chassis for obvious reasons ;) is that where I would have to have it checked out for safety before its first MOT?

Will here, the chassis number should match (on the body & stamped on the chassis) or it won't be registered ;)

Guys, is there an option like "Curry Johny Jointed Rear Links" from Rovertym for the front radius arm that do with the whole mounting brackets ?


2.jpg


1.jpg


Cheers
 
Back
Top