Landyfox
Well-Known Member
- Posts
- 4,489
very impressive!
Roof lining / headliner - pimp my landy!
- Thread starter farmershort
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
For LR headliners I just rip the old cloth off, strip the foam & glue with a wire brush and give it 2 coats of bathroom/kitchen paint..
This is a Discovery 2 but I've done Defender and RRC ones like this.. you can't tell the difference unless you touch it..
This is a Discovery 2 but I've done Defender and RRC ones like this.. you can't tell the difference unless you touch it..
Barbados
Active Member
- Posts
- 947
- Location
- Look at my name DUH LOL
LNH
Member
- Posts
- 86
- Location
- derbyshire
search for veltrim i will post some pics of mine for you!
LNH
Member
- Posts
- 86
- Location
- derbyshire
LNH
Member
- Posts
- 86
- Location
- derbyshire
if your near j30 m1 give me a shout if you need a hand doing it i am carpet fitter so know what i am doing.
i cut 6mm ply to make the sides.
also made my own pull out draw storage box in 24mm marine ply cost me £30 to make!
i cut 6mm ply to make the sides.
also made my own pull out draw storage box in 24mm marine ply cost me £30 to make!
LNH
Member
- Posts
- 86
- Location
- derbyshire
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
That looks good bud. What thickness ply did you use out of interest?
James_mac
Active Member
- Posts
- 264
- Location
- Leeds & Yeovil
LNH
Member
- Posts
- 86
- Location
- derbyshire
5M veltrim van lining mouldable carpet + 5 cans trimfix high temperature glue | eBay
comes with the glue!
comes with the glue!
hi aaron, 5.5 mm, cut out the squares with another underneath to give the "step" then another piece for the back.
ive got the rhs to do so will take pics to explain better.
ordering some netting as per the MUD panels.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Ah, cheers. Yeah that makes sense anyhow. I did notice the step, kinda looks factory like that
If mine come out half as good I'll be happy.
Just not sure how much carpet I should order now.
James_mac
Active Member
- Posts
- 264
- Location
- Leeds & Yeovil
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Aye, so I've seen
Brothers will just be van sides and rear tub as his head lining is good.
My head lining is knackered, so got that to do, both front and rear. Then van sides and tub again.
Wont be doing front of either, as both have lr rubber matting.
Gotta take the roof of his and paint it first mind before I fix the ply in place.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
I think i should have used a lighter shade of grey as its a bit dark in the back
Ah, interesting. I was thinking about using something like anthracite grey.
