Romano lpg help
- Thread starter 24Carrot
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,478
do the lights flash and is the tone continuous or an intermittent beeping?
also, why manually change over? the system is set to auto switch when parameters are met.
also, why manually change over? the system is set to auto switch when parameters are met.
Hi saint
i am not manually changing over. i am letting it do it no auto.
when it changes the 4 fuel lights go out and the single green light flashes and intermittent beeping
DJG
New Member
- Posts
- 55
- Location
- Canterbury
Mine does this occasionally. Can be very frustrating. Sometimes I can just shut the ignition off and it's ok. Other times it'll keep on doing it. It sounds every couple of seconds and flashes.
Mine is doing just that..The LPG experts here say they dont have the software to clear the computer...They say it isnt broken,just blocked. In Italy Friday so hope I can sort it there.
Doing a 4000K trip and it makes a massive difference to costs ;-(
Doing a 4000K trip and it makes a massive difference to costs ;-(
- Posts
- 16,478
Depends on the install and who did it as LPG components can be placed in various locations and where it would fit!
Best course of action is to gooooooogle and look for images of what it would look like and then see if you can spot it in your engine bay!
Never heard of one before called that, but my BMWs OMVL (I believe AEB, Romano and OMVL can share common components depending on install) setup has a LPG Pressure sensor and a Manifold Pressure sensor fitted and looks like this....
One input is for the Pressure sensor and the other measures manifold Vacuum...
If you take the pressure pipe off the sensor with the engine stopped there should be gas pressure there. If not one of the gas valves is not opening or you have a blockage.
You can also get the LPG ECU software from Ebay -
Romano = LPG,GPL,CNG Programming Interface Tuning Kit laptop connection usb | eBay
You can also get the LPG ECU software from Ebay -
Romano = LPG,GPL,CNG Programming Interface Tuning Kit laptop connection usb | eBay
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
Sounds like the gas pressure sensor to me.
DJG
New Member
- Posts
- 55
- Location
- Canterbury
Pressure sensor could make sense, mine only seems to do it when there's less gas in the tank.
hi all well i took it and got it plugged in .it come up with to faults .one was the temp senior. and was tolled that they some times go forty. and when they do some times you can clear this by descenting the battery . but not all ways .and the and the second was that romano do not have a filter .so you have to to strip and clean the solenoid shut off valve.dune this and all good. plugged it in agene and no faults
. was told that the temp senior my be ok some times it is just a way of the ecu make a fault so it will shut down . i got a new tep senior but did not fit it .just dun 120m and no problems:hippie::kettlepot:
. was told that the temp senior my be ok some times it is just a way of the ecu make a fault so it will shut down . i got a new tep senior but did not fit it .just dun 120m and no problems:hippie::kettlepot:
DJG
New Member
- Posts
- 55
- Location
- Canterbury
Nice. Easy enough to strip and clean??
Similar threads
