Rocker Gasket

Paul.G · Sep 24, 2018

Can anyone tell me if the half moon shape part of a td5 rocker gasket is different between 10p and 15p engines, I bought a new Td5 rocker gasket and cannot for the life of me get it to seat properly at the back, any help appreciated

Paul

tom1979 · Sep 24, 2018

I think 15P is LVP000020, 10P is ERR7094. Not sure if the half moon bit is different or not but they can be a fiddle. They are more different at the front of the engine but check you have the right one.

discojamz · Sep 24, 2018

The workshop manual requires you to put a blob of sealant at the corner of the halfmoon bit. Might help if that's where your leak is

KISSMYAURA · Sep 24, 2018

yep they is different!

Paul.G · Sep 24, 2018

tom1979 said:
I think 15P is LVP000020, 10P is ERR7094. Not sure if the half moon bit is different or not but they can be a fiddle. They are more different at the front of the engine but check you have the right one.

Thanks for that, will check when I'm off shift

Paul.G · Sep 24, 2018

discojamz said:
The workshop manual requires you to put a blob of sealant at the corner of the halfmoon bit. Might help if that's where your leak is

Cheers, will get some sealer

Paul.G · Sep 24, 2018

KISSMYAURA said:
yep they is different!

I take it the 15p has a bigger half moon

KISSMYAURA · Sep 24, 2018

no idea, my one is a 15p and it fitted just fine, very thin smear of grease to hold in place so when inverted it stayed put, but i do recall it fitted very well so chances are you got the wrong one!

tom1979 · Sep 25, 2018

discojamz said:
The workshop manual requires you to put a blob of sealant at the corner of the halfmoon bit. Might help if that's where your leak is

Which workshop manual says that? I have never needed to before but may have just been lucky

neilly · Sep 25, 2018

tom1979 said:
Which workshop manual says that? I have never needed to before but may have just been lucky

D2 rave says it.

Cheers

tom1979 · Sep 25, 2018

neilly said:
D2 rave says it.

View attachment 159517

Cheers

Thanks neilly that’s interesting as my 10P Defender has never leaked but the 16P disco I thought had a rear crank seal gone, maybe it is just this (hopefully)

neilly · Sep 25, 2018

tom1979 said:
Thanks neilly that’s interesting as my 10P Defender has never leaked but the 16P disco I thought had a rear crank seal gone, maybe it is just this (hopefully)

But it says NOT EU3, shirley your 16P is an EU3....

Cheers

tom1979 · Sep 25, 2018

neilly said:
But it says NOT EU3, shirley your 16P is an EU3....

Cheers

Yeah that’s true I’d read it the wrong way around. Either way it’s worth a try

discojamz · Sep 25, 2018

neilly said:
D2 rave says it.

View attachment 159517

Cheers

Beat me to it with the screenshot!

Paul.G · Sep 25, 2018

Is this a special sealant or is it gasket sealer, also the rocker gasket I got is a 15p so I need to order ERR7094?

sierrafery · Sep 26, 2018

If you have leaks around the rocker cover better buy 13 x genuine ERR7266 grommets and replace them cos they wear out and that's the cause of leaks in that area

Paul.G · Sep 27, 2018

sierrafery said:
If you have leaks around the rocker cover better buy 13 x genuine ERR7266 grommets and replace them cos they wear out and that's the cause of leaks in that area

Is this the rubbers that the rocker cover bolts go through, mine look fine and are all there, will look into replacing them though thanks

Rocker Gasket

Paul.G

Active Member

tom1979

Well-Known Member

discojamz

Active Member

KISSMYAURA

Well-Known Member

Paul.G

Active Member

Paul.G

Active Member

Paul.G

Active Member

KISSMYAURA

Well-Known Member

tom1979

Well-Known Member

neilly

Well-Known Member

tom1979

Well-Known Member

neilly

Well-Known Member

tom1979

Well-Known Member

discojamz

Active Member

Paul.G

Active Member

sierrafery

Well-Known Member

Paul.G

Active Member

Similar threads