Discodevon
Well-Known Member
- Posts
- 1,448
Hey guys, going to be taking the rocker cover off soon to replace harness, id it worth changing the rocker cover bolts too?
Rocker cover bolts worth replacing or not?
- Thread starter Discodevon
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152
Well-Known Member
- Posts
- 9,311
- Location
- South London/North Kent
Rocker cover bolts are fine to reuse.
Need a dab of RTV around the halfmoon on the rear.
Need a dab of RTV around the halfmoon on the rear.
Anaconda
Well-Known Member
- Posts
- 3,554
- Location
- Thames Valley
No but they do have little rubber seals on the bolt "top hats"
Anaconda
Well-Known Member
- Posts
- 3,554
- Location
- Thames Valley
I didn't change them as I am a tight wad!
www.jgs4x4.co.uk
Discovery 2 Td5 Rocker Valve Cover Bolt Rubber Grommet
Buy Land Rover Discovery 2 Td5 Rocker Valve Cover Bolt Rubber Grommet - ERR7266 at JGS4x4. FAST and FREE UK delivery on eligible orders.
www.jgs4x4.co.uk
- Posts
- 2,061
- Location
- Hertfordshire
Hi, if yours are old/perished & you have any signs of oil leaking/misting it will be worth replacing them. I used BP ones & the rubber part started perishing within weeks (but they don't leak like the old ones), see pic, having said that I still haven't got round to fitting my genuine ones yet. Bolts are fine to reuse just don't overtighten them as the top hat collar bites into the alloy housing.
Attachments
Discodevon
Well-Known Member
- Posts
- 1,448
Thanks for the reply guys! I found a spare genuine rocker gasket whilst cleaning out the garage a few months back so will be fitting that as well, fingers crossed it all goes smoothly
