Last weekend I had to do the injector harness on the old D2!
Read up on things straight forward but was not looking forward to the refit of the rocker box and new gasket!
Anyway no matter what I did I just could not keep the gasket in place at the back.
After 30 mins and much swearing (I don't normally swear!) I had to stop and have a cup of tea.
Then in the moment I had an idea! I placed the gasket and held it in place with small tie-wraps through the bolt holes. then sat it on top of the engine got everything located nice and just cut each one in turn and dropped the bolt in!
I've not seen it as a tip before but it does work!
Read up on things straight forward but was not looking forward to the refit of the rocker box and new gasket!
Anyway no matter what I did I just could not keep the gasket in place at the back.
After 30 mins and much swearing (I don't normally swear!) I had to stop and have a cup of tea.
Then in the moment I had an idea! I placed the gasket and held it in place with small tie-wraps through the bolt holes. then sat it on top of the engine got everything located nice and just cut each one in turn and dropped the bolt in!
I've not seen it as a tip before but it does work!
