rm parabolic springs

urena · Feb 15, 2015

ive just fitted a set on mr 88 3 leaf back 2 leaf front.
bastards sat up by 2 inch on back lwb shackles all round so im puttin standard shackles on back to level the bugger up.
looks like a 70s ford capri at the mo ****in me off.
have to say not ground brakin improovement in ride lol still need to get a helmet

nickjaxe · Feb 16, 2015

My mate was the same....far to high on the back...he took them off a fitted British Springs paras which he is very happy with.

urena · Feb 16, 2015

you aint said if he had 3 leaf rears or what av ya

samc88 · Feb 16, 2015

mines got 3 leaf paras all round and sits level forward and back. Have you got different shackles on the back?

Not sure what make mine are though

dominicbeesley · Feb 17, 2015

I've just fitted some RM paras to my project - the back springs seem bloody hard - I've been trying to compress them to set up the check straps and get the RM shocks to not foul on the spring but with all my weight, 5 wheels and tyres and a couple of bags of sand sat on the back of the chassis I get about 1/8" of compression. That can't be right when I jump up and down on the back of my swb I can get lots of movement...

nickjaxe · Feb 17, 2015

My mates where 2 leaf.

Geof9116 · Mar 16, 2015

There not LWB shackles there 109 2ton shackles. I know because I fitted them over 10yrs ago to this very landrover. I also moved the rear spring hangers forward to lift it. The shocks are not standard either. pM me for all the details for this 2a. Geof

urena · Mar 16, 2015

Geof9116 said:
There not LWB shackles there 109 2ton shackles. I know because I fitted them over 10yrs ago to this very landrover. I also moved the rear spring hangers forward to lift it. The shocks are not standard either. pM me for all the details for this 2a. Geof

ah thats why the bastard springs are to high then

81ll5haw · May 31, 2015

Did you have any trouble with the front prop shaft? Ive just fitted paras and its also about 2" higher and the front prop shaft is now 1" too short.

nickjaxe · May 31, 2015

Are they Rocky Mountain by any chance???

300bhp/ton · Jun 12, 2015

urena said:
ah thats why the bastard springs are to high then

Nope, the springs would be correct. It's the other changes + the springs that have given the results.

rm parabolic springs

urena

Well-Known Member

nickjaxe

Well-Known Member

urena

Well-Known Member

samc88

Drivels spiritual representative

dominicbeesley

Well-Known Member

nickjaxe

Well-Known Member

Geof9116

New Member

urena

Well-Known Member

81ll5haw

New Member

nickjaxe

Well-Known Member

300bhp/ton

Well-Known Member

Similar threads