fairwayblue
New Member
- Posts
- 5
Hi Guy's, the suspension on my P38 is stuck in the access position and wont rise, can I over ride the system and use the inibitor switch to stop this from occuring
Riding on bricks
- Thread starter fairwayblue
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,802
- Location
- Near Poitiers SW France
If it's stuck in the access position or on the bump stops, either it has a hard fault and you have the "Slow 35 mph" message or you have no air pressure to make it rise or if the compressor is working there is a leak.
You need EAS diagnostics to read the faults.
You need EAS diagnostics to read the faults.
- Posts
- 58,170
- Location
- Preston Lancs.
If it won't rise and there is no fault message odds on it has no air pressure. Do the compressor and diaphragm valve checks in my "How to" at top of page. Then get back a say what you found.
sas1810
New Member
- Posts
- 1,347
- Location
- back in Willenhall, West Midlands.
and the soapy water test around all joints and bags to find a leak if your pump is working.
1000's of threads on this.
1000's of threads on this.
Similar threads
