ride height sensor

Snaggapuss · May 20, 2019

Hej, been trying to sort out a fault on the ride height sensor on my F2 SD 2010, the gap OBD11 was telling me something wrong with earth on height sensor. Went to have a ganders saw connector to the ride height sensor though okay will disconnect and give it a good spray with electrical cleaner only to have the connector disintegrate as I tried to disconnect. Anyone know where I can get a new cable it goes from height sensor to a box on the diff with another cable splitting of that and going who knows where.

Arctic2 · May 20, 2019

Can you put a photo up of the connector and where it is on the diff.

td4van · May 21, 2019

Do you have factory fit xenons?

Not sure why the height sensors would go into rear diff as they’re only used for auto headlight levelling on xenons

Snaggapuss · May 22, 2019

my bad they went to box on the vcu? the auto box before the diff. anyways here are the photo's

my finger is on the wire that goes to who know where, it is the one behind the abs wire.
the others are of the box it plugs into, couldn't get camera to show where it plugs into, it is going to be a pig to unplug it. then there is the actual connector into the height sensor.

Snaggapuss · May 23, 2019

Arctic2 said:
Can you put a photo up of the connector and where it is on the diff.

photo's uploaded

td4van said:
Do you have factory fit xenons?

Not sure why the height sensors would go into rear diff as they’re only used for auto headlight levelling on xenons

yes I have the xenons

ride height sensor

Snaggapuss

Active Member

Arctic2

Well-Known Member

td4van

Well-Known Member

Snaggapuss

Active Member

Attachments

Snaggapuss

Active Member

Similar threads