Rewiring issues

Adrian1062 · Nov 7, 2018

Hi, Doing a complete rebuild of a 1986 90, nearly there but …
Can anyone tell me where the following connect to the main/engine looms:

Fuel tank sender
Brake switch
Diff lock switch

Pictures would be even better,
Thanks

Discokids · Nov 7, 2018

Brake switch spur runs out behind the speedo and connects right next to the switch.
Difflock and fuel connect to the main, not engine, looms. Diff lock might even be a fixed wire but can't remember.

flat · Nov 8, 2018

Discokids said:
Brake switch spur runs out behind the speedo and connects right next to the switch.
Difflock and fuel connect to the main, not engine, looms. Diff lock might even be a fixed wire but can't remember.

Yeah dofflock is a single wire that goes up to the loom iirc

zeaphod · Nov 8, 2018

IIRC, the difflock is a single wire that plugs into the main loom plug at the engine side of the bulkhead. You should be able to identify the correct 'ole for the plug buy finding the same colour coded wire on the loom side of the plug - that's how I did it.

zeaphod · Nov 9, 2018

I think the diff wiring is Black with a Blue stripe - hard to see when covered with dirt, but if you give the wiring a squirt of brake cleaner first it will make the colours easier to see.

Rewiring issues

Adrian1062

New Member

Discokids

Well-Known Member

flat

Well-Known Member

zeaphod

Well-Known Member

zeaphod

Well-Known Member

Similar threads