Reverse light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

Glack Attack

Member
Posts
17
Hi Forum.

Recently started having problems with the reverse light not working. It’s not the bulb as I tried the reverse light on the fog lamp side and all works as it should. Measured voltage on reverse side and get reading of zero. Could this possibly be the reverse switch needing replaced?

It is a 2013 2.2 Puma 90.

Thanks for reading.
 
Glack Attack said:
Can you tell me what fuse it is please? Thanks for replying!
Click to expand...
Fuse F10. In the fuse box under the driver's seat, not the one in the secondary box under the dash. If you need to change the switch it is accessible after taking the floor panel out which sits over the gearbox. Haynes manual says remove the handbrake lever to get the floor out, but I found it possible to wiggle the panel out without removing the handbrake. Gear lever is a quick release item, takes about 2 seconds to remove it.
 

Attachments

  • Defender MY12 Electric Wiring Diagrams (dragged).pdf
    82.6 KB · Views: 32
  • Defender MY12 Electric Wiring Diagrams (dragged) 2.pdf
    90.6 KB · Views: 39
I checked underneath the seat but there was no diagrams to tell me what one was F10. Did have a look at a diagram on google but it was pointing to one of the black relays. Can you show me exactly what fuse it is? My next port of call will be the switch. Thanks!
 
There should be a diagram on the underside of the metal cover under the driver's seat.
fusebox.jpg
fusebox2.jpg
 
Perfect, thanks for sharing this!

I couldn’t see a diagram on the bottom of the metal cover.

I will investigate this and see what comes of it.
 
Hi again. I have also replaced the 4 bulbs in the centre console around the temperature control and sliders underneath the stereo but these are still not lighting up. The bulbs that were there were all burnt out and the glass was black. These are still not lighting up. Do you know if these are fed from a separate fuse? All other internal lights work and have checked the white plug that these plug in to. All seems fine with no breaks in the wiring. Thanks.
 
I think it's a 10 amp fuse in position F20 in the fuse box under the dash. It definitely is on my 2.4 TDCI, I don't know if the fuse layouts differ though.
 
You must log in or register to reply here.

Similar threads

H
Oh no! Not that old fog light question again.
Replies
14
Views
380
dag019
dag019
T
5th and reverse not engaging.
Replies
3
Views
185
tottot
tottot
B
defender 2.4 puma reverse light switch
Replies
4
Views
490
BEASTIE 90
B
MechanIX
TD5 110 2005 - Reverse light switch location?
Replies
5
Views
836
Chalky.
Chalky.
H
Reverse switch r380
Replies
4
Views
781
Shippers
Shippers
Back
Top