Retrofit heated seats? Is it possible?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mine had the brown plug coming out of the carpet under each seat, but I had to fit the elements to the seats.

To be sure if you have the wiring in the car you need to remove the switch panel in the centre consul and see if you have the two connectors for

Yeah there is two plugs behind the switch panel but nothing on the seats so i would need the elements it might be worth trying a breakers maybe
 
Right then here are the connectors i have found
 

Attachments

  • IMG_1427.JPG
    IMG_1427.JPG
    212.8 KB · Views: 528
  • IMG_1433.JPG
    IMG_1433.JPG
    351.6 KB · Views: 500
  • IMG_1435.jpg
    IMG_1435.jpg
    410.5 KB · Views: 470
  • IMG_1437.jpg
    IMG_1437.jpg
    470.1 KB · Views: 422
  • IMG_1440.jpg
    IMG_1440.jpg
    525.3 KB · Views: 395
  • IMG_1441.jpg
    IMG_1441.jpg
    529.8 KB · Views: 407
Last edited:
the first two are under the seat the rest are from the centre console. green and black are the same style, the black and white are not similar to any of them? what do people think?
 
the first two are under the seat the rest are from the centre console. green and black are the same style, the black and white are not similar to any of them? what do people think?

You're in !!!!.

All you need is the 4 seat heater pads, 2 switches and a new consol switch fascia.

Cheers..
 
so if the wire it attaches to comes from the front of the seat or rear of the seat? that means it already has the pads installed?
 
There are only two wires in the plug that comes out of the seat,why not just try power and earth to them and see if owt happens.

Theres actually 4 in the female brown plug. If you cross terminals 1 and 4 in the switch connector youll find 12 volts at the brown plug.

All you need is the four heater pads. They are joined in series so you only have one male brown plug coming out of the rear bottom of the seat.

Cheers.
 
Back
Top