Retro fit dRL?
- Thread starter Johnm1693
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hughdavies
Well-Known Member
- Posts
- 1,502
- Location
- Western Brecon Beacons mynudd du.
You already have them fitted, they are called side lights.
Front DRLs can be fitted easily enough, using the kit (including the controller) from Powerfull UK. For year lights, simply put on the headlights.
Ot is possible to fit LEDs to the rear reflectors, but they're too low and too dim to work effectively as DRLs.
Simply use the lights to put the tail lights on.
Many thanks, Nodge.,
Much appreciated
Actually Nodge ,
I was wondering about 2 x Kelsall bar type leds in the rear bumper?
Why?
Because the Mrs asked to have front and rear leds!
Make sure they're "E" marked, or you could have problems at MOT time.Actually Nodge ,
I was wondering about 2 x Kelsall bar type leds in the rear bumper?
Why?
Because the Mrs asked to have front and rear leds!
Thank you Nodge, good point!
Do you think they would cause / contribute to coding errors?
They down draw a great deal of current?
Thank you
If you take the power from the fuse suggested in the Powerful UK DRL instructions, then it won't upset the vehicle electronics at all.
hughdavies
Well-Known Member
- Posts
- 1,502
- Location
- Western Brecon Beacons mynudd du.
To comply with the law/ MOT rules your DRLs must turn off automaticaly when you switch on your proper road lights. Its a modivication to the car wiring system, so you need to inform your insurance company. Is it really that dificult to simply use the existing light switch?
