Resetting Alarm/Immobiliser sequence.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Might be worth checking your RF receiver.

Which is just in front of the rear sunroof between the roof lining and the roof. Assuming it is a discovery with a rear sunroof.

The earth connection can start to fail. It is worth checking anyway.

Cheers
 
Hi Guys My fob has just failed and my spare has been driven to work by my husband! I have 2 codes: a four digit key code and an 8 digit code beginning 1515 with 0s contained in the last four digits. I have tried the four digit key code (which I think is a cutting code) and the 1515 as I saw mention of using that one. Neither have worked so I am left with the last four digits containg 0s or an eight digit code containing 0s.
What next?
Thanks
ok so I'm going out on a limb here the code I have is: EKA 15 15 03 10 and I have tried entering them as four numbers fifteen fifteen three an ten. It couldn't be that you have to start with the lock direction for the first number could it???
The only one I haven't tried is the individual digits 0 3 1 0 but how to enter a "0"
 
Last edited:
That 15-15-3-10(fifteen-fifteen-three-ten) can be a valid EKA and should be entered as it is and following the correct procedure, there's no such thing az entering 0.
EKA.jpg
 
Heyyyyy!!! I've read through all this but don't think my answer is there....

I have a 110 td5 with an unchipped key and no central locking. I have an alarm/immobiliser key fob but never used it. Today the key fob (and me!) accidentally got wet wet wet. The immobiliser has turned itself on and key fob is doing nothing.

Any of you guys have any advice for me??
 
sierrafery said:
Yes, remobilise it with the EKA code then fix it or disable the immobiliser
Click to expand...

Unfortunately the keyfob doesn't seem to want to un-immobilise it permanently. Or even set it actually. But every time I get out and leave the car it will set itself.

I can get in without the alarm sounding. But it won't start unless I press the keyfob first.

But as I said. The keyfob won't completely deactivate the immobiliser (which I would rather, until prob is rectified)
 
sierrafery said:
I have no ideea... see a P38 owner's manual
Click to expand...

Have done, also checked the EKA code is correct with LR...or at least the garage my RR is currently stuck in claims it has done.
I don’t know if they have done something stupid, no problems of this nature before I took it in, it was showing sensor alerts for ABS and traction control plus a red sensor for the airbag (offside passenger door according to the garage)
I only took it there as Quik Fit said their diagnostic computer (wouldn’t talk to my car....whatever that means!)
Now, the garage originally said it was having problems getting the sensors but got them quick enough when I said I was picking it up to take to another garage.
Now they say, and demonstrated to me, immobiliser won’t disengage....they unlock the car....wait until the alarm stops..then try to enter the EKA...nowt!
 
sierrafery said:
So you know that the procedure is not like for the D2 then ?
Click to expand...
Hi, The bloke in the garage said he was following the instructions he had found in the user manual which seems to be the same as outlined on here, one of the other things he said, is that it could be the battery not being the correct model for the car.....which I thought he was talking bollocks...but I decided to replace the battery anyway and while I was ordering it I mentioned the problems I was having and the bloke said he had come across this problem before with this model!?
Anyway, new battery will be here tomorrow, if that doesn’t work I’m just going to have it recovered back to my house.
 
The EKA procedure seems to be the same but it's not, compare with the attachment carefully and you'll see... nr 1 is different so is the end of it and if it's not 100% respected it doesnt work... though if the vehicle is unlocked with the fob and it's still immobilised i'm affraid that the BeCM is gone, i dont see how a battery would cause that

P38 EKA.jpg
 
Last edited:
Sorry not to have replied earlier, just to say thank you, your link with the EKA code illustration seems to have saved the day.
Though the garage claims this was what they were doing anyway!
Once again sorry for not thanking you earlier.
 
hi new to lanny fourm so i have a defender 90 td5 on a 1999 and have been messing around with it today started fine this morning no bother then just turned it off and wont start again now im guessin something todo with the immboiliser keep reading about doors being open and then shut and then not starting i have no key fob but do have the eka code i think its called the only other thing is there is no flashing light from the immboiliser i wondering if ive done something stupid cracks overs all lights work just no flashing light or wont fire up need some help please thanks
 
You must log in or register to reply here.

Similar threads

feyniriel
P38 engine disabled for no reason, please help!
Replies
5
Views
1K
pwood999
pwood999
G
Discovery 2 TD5 Donor Conversion
Replies
17
Views
456
GTRekky
G
L
Steering lock / alarm problem
Replies
1
Views
474
bankz5152
bankz5152
C
D2 2004 td5 no start immobiliser
Replies
1
Views
757
Chips666
C
F
Keyless entry imobilliser issue
Replies
1
Views
238
Fludey
F
Back
Top