Tenebreaux
Well-Known Member
- Posts
- 4,358
- Location
- Armagh
Where did you lads get your fittings from? I have a few but nowhere near enough to do all four corners.
P38A Replacing brake lines.
- Thread starter Grrrrrr
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
I got mine off fleebay https://www.ebay.co.uk/itm/50x-Male-Brake-Pipe-Fittings-Flare-Nuts-Metric-10mm-x-1mm-3-16-Pipe-DIN-ISO/372943846402?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
you will need 8 male and possibly 2 female x female connectors.
That is for doing the backs the front pipes on mine a Grrrrrrr`s still looked like new so we left them alone.
you will need 8 male and possibly 2 female x female connectors.
That is for doing the backs the front pipes on mine a Grrrrrrr`s still looked like new so we left them alone.
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
I did consider brass fittings but looking at the price and the fact the steel ones should last a good few years thought better of it.
- Posts
- 19,317
- Location
- Buckinghamshire, UK. ('95 DT)
Pity you're not closer as I have enough left. Still, I suspect we'll do MrGorsky's once he's sorted his engine.
Tenebreaux
Well-Known Member
- Posts
- 4,358
- Location
- Armagh
Cheers. All four discs and pads need doing so I may as well do the pipes as well.
Tenebreaux
Well-Known Member
- Posts
- 4,358
- Location
- Armagh
A few years ago I'd have been just down the road. I lived on Clyde Road in Stanwell.
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
You will probably find the front are fine and leave well alone especially as the passenger side runs at the back of the engine along the bulkhead and looks a right pig .
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
That`s only a few roads away, how long ago was that i have been here since 93.
Last edited:
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
Give me shout when they need doing, as i already have some of the pipes ready made, i should have left a set with you for his
Henry_b
Think outside, no box required.
- Posts
- 15,522
- Location
- somewhere else
I remeber the mechanic that did my my classic's brake lines..
Completely the wrong routing and he must of ended up with 6ft of spare line and instead of cutting it off, wrapped it around a wine bottle!
It had what looked like massive pig tails under the bonnet LOL
Completely the wrong routing and he must of ended up with 6ft of spare line and instead of cutting it off, wrapped it around a wine bottle!
It had what looked like massive pig tails under the bonnet LOL
Tenebreaux
Well-Known Member
- Posts
- 4,358
- Location
- Armagh
Just before I came over here, so about seven years ago now.
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
Tenebreaux
Well-Known Member
- Posts
- 4,358
- Location
- Armagh
I was running round in a 535i V8 back then. Boys at work thought I was a drug dealer.Shame i have had the p38 for nearly 13 years you would have probably see it around
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
- Posts
- 2,427
- Location
- Isle Sheppy
That would have been a nice ride out in the sunshine right about the front pipes there not corroded at all on mine
brianp38dse
Well-Known Member
- Posts
- 20,107
- Location
- heathrow
- Posts
- 2,101
- Location
- Mull of Kintyre
Well they are ****cked
Scary
Scary
Henry_b
Think outside, no box required.
- Posts
- 15,522
- Location
- somewhere else
