Replacement radiator

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I recently replaced my rad with something similar. I still had the original. The new one is not going to last any where near as long. If I was doing it again I would get the original reconditioned. The old one is a much more solid unit.
 
Last edited:
Cheers guys....i'll get in touch with a few local places and see what they say - the issue is that not only are most of the fins turning to dust, the pins that mount the radiator are knackered.
 
Only found on company local - quoted 250+vat for recoreing....

The ones off ebay only have to last 8 years each to make them more economical....
 
I fitted one from paddocks I think its the same as Mike's, one thing that threw me was the oil cooler connectors were different, I looked for adaptors and call paddocks about it, but in the end I just took the ones on the old rad cleaned them up and put them in the new one. The new aluminium rad did seem more flimsy than the old copper one, and was about 1/3 of the weight, but it works and does not leak. I think it was about £70.
 
You must log in or register to reply here.

Similar threads

steve2286w
200tdi radiator bits
Replies
0
Views
707
steve2286w
steve2286w
R
P38A Advice on Diesel Radiator Replacement
2
Replies
23
Views
3K
RAW111111
R
Naf623
Disco 2 Front wheel arch rust & replacement, gearbox seals, brake hoses
Replies
2
Views
882
tilly2
T
H
I'd like to make a dream come true...
2
Replies
20
Views
2K
Hippo
Hippo
Chester18
Replacement Engine Advice Help Needed
Replies
13
Views
2K
ifloochies
ifloochies
Back
Top